Related Manuals for Senoven SEN 1602
Summary of Contents for Senoven SEN 1602
- Page 1 MODEL SEN 1602 BLOWING CONVEYOR OVEN (DIGITAL SCREEN) USER & MAINTENANCE MANUAL ŞENGÜN MAKİNA İNŞAAT ve KIRTASİYE SAN. TİC. LTD. ŞTİ...
- Page 2 This device must be installed in accordance with regulations. Refer to the instructions before installing and using the device. SEN 1602 / SENOVEN...
-
Page 3: Warranty Certificate
- The failures and damages given by external factors are out of the warranty terms. - Any failure of the product warranty period is added to the product warranty time. The repair time is until 20 working days. AUTHORIZED PERSON STAMP –SIGNATURE SEN 1602 / SENOVEN... - Page 4 For information you coonot understand , ask your nearest out horized service Please note that if the technical service personnel is kept waiting you will be billed for each hour. SEN 1602 / SENOVEN...
- Page 5 Do not use paper when placing food product through the oven! Usage of flammable materials may cause a fire and should never be placed in the oven. WARNING! Do not put any object to anywhere of the oven except the conveyor. WARNING! Always be careful while you are working. SEN 1602 / SENOVEN...
- Page 6 Cleaning and maintenance are the most important factors of oven performance. The processes which are not available in the manual can cancel the appliance of warranty, cause property damage, injury or death. Read and understand the instructions in the manual SEN 1602 / SENOVEN...
-
Page 7: Table Of Contents
2.8 Low Chassis Assembly 2.9 Chassis-Oven Assembly 2.10 Double Floor Oven Assembly 2.11 Triple Floor Oven Assembly 2.12 Air Duct Disassembly / Assembly SECTION 3: INSTRUCTIONS FOR USE 3.1 Distance Requirements 3.2 Ventilation 3.3 General Information of Ventilation SEN 1602 / SENOVEN... - Page 8 3.4 Ventilation Advice 3.5 Gas Connection 3.6 Installation Elements 3.7 SEN 1602 Oven Technical Specifications Table SECTION 4: PROGRAMMING-START & STOP 4.1 Warnings 4.2 Closing 4.3 Error / Warnings Messages 4.4 Burner Fault 4.5 Functions 4.5.1 Temperature Cutting Switch 4.5.2 Electrical Installations 4.5.3 Limitation Requirements –...
-
Page 9: Section 1: Introduction
1.1 Introduction of Body Components: NOTE: Entrance of product depends for the cooking style. The out sheet can be attached other side of the oven. 1.2 Functions of Parts: 1.2.1 Oven Body: Every SEN series oven has a main body. SEN 1602 / SENOVEN... -
Page 10: Overlap Assembly
Conveyors provide the input and output of the product. Belt is controlled by microprocessor. Cooking time can be set between 1 - 30 minutes. The speed of belt determines the Products cooking time. The width of belt is 535 mm and consist by interlocking wires. SEN 1602 / SENOVEN... -
Page 11: General Information
Steel Enclosure 430 Stainless Steel DB Level < 65 dba Source Electricity and Gas NOTE: Burner does not heat the oven every moment. Because Oven Protects chamber temperature. If the chamber temperature is enough, burner shuts down. SEN 1602 / SENOVEN... -
Page 12: Electrical And Technical Specifications Table
IMPORTANT: Electrical input connection must be connected according to the order of the input terminals. (PHASE TO PHASE, NEUTRAL TO NEUTRAL, – GROUNDING TO GROUNDING) NOTE: Specifications can be changed by Şengün Makina. Above Specifications are given for information. SEN 1602 / SENOVEN... -
Page 13: Dimensions
1.10 Dimensions: Single Oven (Isometric) Dimensions Outside Triplex Duplex (Front View) SEN 1602 / SENOVEN... -
Page 14: Side Cover
Triplex (Side View) SIDE COVER DISTANCE BETWEEN WALL GAS ENTRANCE ELECTRICAL INPUT Top View SEN 1602 / SENOVEN... -
Page 15: Section 2: Assemble
SECTION 2: ASSEMBLE OPTIONAL PART NAME UNIT Product Out Sheet Forward/Back Waste Collecting Sheet Entry and Exit Cover Sheet Stopper Sheet (Optional) SEN 1602 / SENOVEN... -
Page 16: Front/Back Waste Collecting Sheet
2.1 Product Out Sheet: Attach the product out sheet to the conveyor chassis as shown in the figure. And Push it. 2.2 Front/Back Waste Collecting Sheet: Front and back waste collecting sheets are taken out as shown in pictures. SEN 1602 / SENOVEN... -
Page 17: Entry And Exit Cover Sheet
Covers are set as desired through holes which are different levels. Covers are attached by bakelite bolts. 2.4 Stopper Sheet (Optional): Stopper, blocks the products and keep them into the belt. Stopper is attached to the belt. SEN 1602 / SENOVEN... -
Page 18: Belt Assembly
2.5 Belt Assembly: The conveyor is mounted inside the machine as shown in the picture. The drive shaft is centered on the clutch pipe. SEN 1602 / SENOVEN... - Page 19 Clutch pipe is attached by the drive shaft spring as shown in the figure. Belt assembly is completed. For disassembly, use every steps in reverse order. SEN 1602 / SENOVEN...
-
Page 20: Belt Wire Assembly
3. If belt wire problem appears, remove a 4. The final wire assembly wire as shown in the figure. For disassembly, use every steps in reverse order. NOTE: Clean the belt wire once a week or month for better performance. SEN 1602 / SENOVEN... -
Page 21: High Chassis Assembly
2.7 High Chassis Assembly: SEN 1602 HIGH CHASSIS (L 885 mm x W 719 mm x H 620 mm) SPARE PARTS LIST SPARE PART SPARE PARTS SPARE PART SPARE PARTS ITEM UNIT ITEM UNIT NUMBER DESCRIPTION NUMBER DESCRIPTION 01981 CHASSIS LEG SHEET... -
Page 22: Low Chassis Assembly
2.8 Low Chassis Assembly: SEN 1602 LOW CHASSIS (L 885 mm x W 719 mm x H 265,5 mm) SPARE PARTS LIST SPARE PART SPARE PART ITEM SPARE PARTS DESCRIPTION UNIT ITEM SPARE PARTS DESCRIPTION UNIT NUMBER NUMBER 01797 CHASIS LEG SHEET... -
Page 23: Chassis-Oven Assembly
2.9 Chassis-Oven Assembly: SEN 1602 / SENOVEN... -
Page 24: Double Floor Oven Assembly
2.10 Double Floor Oven Assembly: DETAIL B SCALE 1:3 NOTE: Bolts are included in the package ITEM SPARE PART NUMBER SPARE PART DESCRIPTION UNIT 02056 HOLDER 00046 BOLT SEN 1602 / SENOVEN... -
Page 25: Triple Floor Oven Assembly
2.11 Triple Floor Oven Assembly: DETAIL A SCALE 1:5 NOTE: Bolts are included in the package. ITEM SPARE PART NUMBER SPARE PART DESCRIPTION UNIT 02056 HOLDER 00046 BOLT SEN 1602 / SENOVEN... -
Page 26: Air Duct Disassembly / Assembly
Pillar Cover Pillar Cover Finger Guard Finger Guard Bottom Air Duct Assembly Upper Air Duct Assembly 5. For reassembly, use every steps in 4. Slide the air duct cover and remove the reverse order. middle sheet. SEN 1602 / SENOVEN... -
Page 27: Section 3: Instructions For Use
The ventilation mouth (hood) should be in harmony with the general ventilation and heating system. ANTENTİON: Do not allow air to flow through the cooking tunnel. The air must not be directed to the front top of the oven, to the side or to the rear. SEN 1602 / SENOVEN... -
Page 28: Ventilation Advice
Getting caught in the belt could result in serious injury. DANGER! If the power supply cord appears to be damaged, do not attempt to operate the unit. Contact a service agent or qualified electrician to repair! SEN 1602 / SENOVEN... -
Page 29: Installation Elements
TTR Cable is Flexible, shatterproof and loosen proof Grounding has to be proper. Use regulator if voltage is high or low. NOTE: If you fallow the above steps, assembly process can be made smoothly and quickly. SEN 1602 / SENOVEN... -
Page 30: Sen 1602 Oven Technical Specifications Table
3.7 SEN 1602 Oven Technical Specifications Table: OVEN ELECTRICITY-GAS TECHNICAL SPECIFICATIONS TABLE Full Ampere Gas Inlet Capacity Average Voltage Faze T (PE) Performance Loading Pressure (Kw) Gas Usage Gas Usage 230V 1,375 m³/ 0,65 m³ 40,000 21 mbar 13 kW... -
Page 31: Section 4: Programming, Operating And Closing
Maximum Damp: %90 Rh (without condensation) Height: Up to 2000 meters Environments where device use is not suitable. Corrosive atmospheric environments. Explosive atmospheric environments. Home applications (The device only can be used industrial applications). SEN 1602 / SENOVEN... - Page 32 SEN 1602 / SENOVEN...
- Page 33 13. Program Set Button: Press this button once for 5 seconds and enter the set section. 14. ON/OFF Button: With this button the device is returned to the “on’’ or “off’’ state. Button turns off when the device is switched off screen turns off. SEN 1602 / SENOVEN...
-
Page 34: Warnings
The more detailed description is on page 57. 5. Do not keep combustible and explosive material around the machine. 4.2 Closing To turn off the oven, touch ON/OFF and switch of with 0-1 switch. SEN 1602 / SENOVEN... -
Page 35: Burner Fault
FAULT 26: Reset Knob error – if the button is switched on for more than 10 seconds. Error is set till the Reset Knob will be released. 4.4 Burner Fault Occurs when the burner does not fire or if there is fault in the burner system. SEN 1602 / SENOVEN... -
Page 36: Functions
The quick disconnect tool or its pipe should limit the movement of the oven. 3. If the restriction is removed due to cleaning or maintenance, it must be returned back to the original after cleaning or maintenance has finished. SEN 1602 / SENOVEN... -
Page 37: Operator Maintenance
If the oven fails to operate, check the circuit breaker to be sure it is turned on. Be sure that circuit breaker is ok before you call the Authorized Service Agency. The name and phone number of the Authorized Service Agency should be located at the bottom of the data plate SEN 1602 / SENOVEN... -
Page 38: Cleaning Instructions
The periodic intervals for preventative cleaning may vary greatly depending upon the environment in which the oven is operating. You must discuss the need for Preventive Maintenance with your Authorized Service Company to establish a proper program. SEN 1602 / SENOVEN... -
Page 39: Section 5: Cooked Products
SEN series ovens, show much better performance than other ovens (Especially pizza cooking). 5.2 Cooking Time and Temperature: PİZZA - ALUMINIUM PAN - TIME: 6 MINUTES - 260 °C - FRESH PİDE - OVER CONVEYOR - TIME: 5 MINUTES - 260 °C - FRESH SEN 1602 / SENOVEN... -
Page 40: Total Cooking Calculation
/Hour Total Production 85,2 170,4 Amount /Hour Sample 2: Oven Chamber Length: 710 mm. Cooking Time: 5 dk. Pan Length: 500 mm. Producti 5 dk. 17,4 Amount/ Hour Total Producti 17,4 52,2 Amount Pan Length /Hour SEN 1602 / SENOVEN... -
Page 41: Sample Capacity Table
30 cm 36 cm 41 cm Pizza Diameter 5 Minutes 5 ½ 6 Minutes 6 ½ 30 cm 36 cm 41 cm Pizza Diameter 7 Minutes 7 ½ 8 Minutes 30 cm 36 cm 41 cm SEN 1602 / SENOVEN... -
Page 42: Section 6: Spare Parts Manual
SECTION 6: SPARE PARTS MANUAL SPARE PARTS MANUAL SEN 1602 / SENOVEN... - Page 43 M00392 FRONT SEN 1602 / SENOVEN...
- Page 44 BOLT BOLT 00006 01103M AIR PROTESTAT WASHER 00317 02580 BOLT WASHER 01305 00365M CONTROLLER BOX 01862 01879 CONTACTOR STEP ENGINE SHEET 01861 01831 BOLT ENGINE SHEET 02351 BURNER 00364M SCREEN COMMUNICATIONS CARD 08091 M00376 BUTTON BURNER SEN 1602 / SENOVEN...
-
Page 45: Front Cover
01548 WINDOW 07162 GLASS FRAME 07160 GLASS FRAME BRACKET 01759 GLASS EDGE SHEET 01752-1 RUBBER PLUG 01753-1 COVER HANDLE 02342 BOLT 00045 101503 BOLT 04077 WASHER 00157 BOLT 07172 GLASS ON/OFF LAMA 07170 GLASS ON/OFF LAMA SEN 1602 / SENOVEN... - Page 46 WASHER 00277 WASHER 01317 RESISTANCE OUTPUT MACARON 01728 TERMINAL 01672 BOLT 01075M BACK COVER 01299 WASHER 00042 WASHER 00041 BOLT 04082 BOLT 02579 WASHER 01717 STUD 01718 FAN CASING SHEET 01961 WASHER 01959 02391 BOLT 00052 SEN 1602 / SENOVEN...
- Page 47 01672 BOLT 01728 TERMINAL 01317 RESISTANCE OUTPUT MACARON 01717 STUD 01959 01961 WASHER 01718 FAN CASING SHEET 01722 WEDGE 01719 BAHÇIVAN ENGINE 02579 WASHER 00042 WASHER 01519 BOLT 00426M 01075M BACK COVER 01299 WASHER 00041 BOLT SEN 1602 / SENOVEN...
- Page 48 BOLT 00453M OVEN BODY M00321 FRONT COVER 01731 THERMOCOUPLES 00012M AIR DISTRIBUTOR SHEET 01778 SMALL FINGER PLASTER SHEET 00015M SMALL AIRWAYS SHEET 00014M BIG AIRWAYS SHEET 01774 BIG FINGER PLASTER SHEET 00013M AIR MOUNTING SHEET 01596-1 SEN 1602 / SENOVEN...
- Page 49 M00369 SSR BOX SEN 1602 / SENOVEN...
- Page 50 AIR ROUTING SHEET 02334 POWER SUPPLY 02319 SPONGE 01307 01271 BOLT 02634 SPONGE 01306 01011 SSR SHEET 00292 LIMITER 01296 WASHER TERMINALS (GROUNDING) 00293 02208 FUSE TERMINALS RAIL 01886 00046 BOLT 01822 SSR RELAY 01292 VARISTOR SEN 1602 / SENOVEN...
- Page 51 01789 WASTE PAN 01791 PRODUCT OUT SHEET 00369M BELT CHASSIS 01807M BELT WIRE 00096 SPLIT PIN 01812 BELT WIRE 01813 BELT WIRE 01814 BELT WIRE 00321M CONVEYOR DRIVE SHAFT 00322M CONVEYOR DRIVE SHAFT 01795 LIMITER CHASIS SEN 1602 / SENOVEN...
- Page 52 SEN 1602 / SENOVEN...
-
Page 53: Ignition Electrode
01880 BRAIN 01885 ELBOW 01501M BURNER BODY 01502M BURNER NOZZLE ELBOW 01505M AIR ADJUSTMENT CHASSIS 01506M AIR ADJUSTMENT COVER 01507M BURNER INLET PIPE 101504 CYLINDER HEAD GASKET 00395M ELBOW 101505 CYLINDER HEAD GASKET 00052 07139 RECORD SEN 1602 / SENOVEN... -
Page 54: Section 7: Electrical Diagram
SECTION 7: ELECTRICAL DIAGRAM SEN 1602 / SENOVEN... - Page 55 SEN 1602 / SENOVEN...
- Page 56 SEN 1602 / SENOVEN...
- Page 57 SEN 1602 / SENOVEN...
-
Page 58: Section 8: Troubleshooting
If the oven not working, see if automatic fuse works. If there is no problem, call technical service. There is technical service number on the information plate on the back of the oven. If you can’t see technical service number on the oven, please call company. SEN 1602 / SENOVEN... -
Page 59: Section 9: Labels
SECTION 9: LABELS (High Temperature) (Grounding) This device must be installed in accordance with regulations. Refer to the instructions before installing and using the device. Electrical Input Warning Labels SEN 1602 / SENOVEN... - Page 60 Technical Label (Product Card) Warning Labels NOTE: SEN 1602 / SENOVEN...
- Page 61 SEN 1602 / SENOVEN...
- Page 62 Phone : +90 212 671 23 23 (Pbx) Phone 2 : +90 212 671 84 24 Fax : +90 212 671 88 28 GSM : +90 533 957 14 53 E-Mail : info@sengunmakina.com www.sengunmakina.com – www.acpisir.com SEN 1602 / SENOVEN...
Need help?
Do you have a question about the SEN 1602 and is the answer not in the manual?
Questions and answers