Using The Cursor (The Selected Map Location); Audiovox Navigation Software Concepts; Smart Zoom; Position Markers - Audiovox NAV 101 - NAVIGATION SOFTWARE Update Manual

2.2.4 Using the Cursor (the selected map location)

First, place the Cursor at the desired map location with one of the following options:
• Use the Find menu to select a location. The map returns with the selected point (the Cursor) in the middle, and the Cursor menu appears with the
available options.
• Tap the screen and tap again to place the Cursor at the desired location. Now tap
You can perform the following actions:

2.3 Audiovox Navigation Software concepts

2.3.1 Smart Zoom

Smart Zoom provides much more than just a usual automatic zoom feature:
• While following a route calculated by Audiovox Navigation Software: when approaching a turn, it will zoom in and raise the view angle to let you
easily recognise your manoeuvre at the next junction. If the next turn is at a distance, it will zoom out and lower the view angle to be flat
so you can see the road in front of you.
• While driving without an active route in Audiovox Navigation Software: Smart Zoom will zoom in if you drive slowly and zoom out when you drive at
high speed.
Enabling Smart Zoom
Tap the map to let the map control buttons appear, and then tap
Fine-tuning Smart Zoom
Tap the map to let the map control buttons appear, and then tap and hold
Smart Zoom if necessary.

2.3.2 Position markers

2.3.2.1 Current GPS position and Lock-on-Road

When your GPS position is available, AUDIOVOX Navigation Software marks your current position with the
The -icon is aligned to the nearest road to suppress GPS position errors. The direction of the icon is one of the directions of the route.
To use the current GPS position, tap
• a Favourite
• a POI
• a map marker Pin
Button
, the Position menu appears and you can save the GPS position as one of the following:
to open the Cursor menu.
In the active route, uses the Cursor as the start point by replacing the
current GPS position
In the active route, uses the Cursor as the destination by replacing the
previous destination
In the active route, uses the Cursor as a via point (an intermediate
destination) preceding the destination
In the active route, uses the Cursor as the destination while keeping the
previous destination as a via point
Shows the different routes calculated by the available routing methods.
Choose the one that suits your needs the best
Saves the Cursor as a POI
Saves the Cursor as a Favourite location
Marks the map with a Pin at the Cursor
Opens a screen with the name, address and coordinate information of
the Cursor, and the list of POIs near it
, to enable Smart Zoom.
to open the Smart Zoom Settings window. Modify the zoom limits of
12
Action
icon on the map.