Page 1
User manual Senior Tel 1 version 3.02 18.01.2024 ST101-1...
Page 2
Mobi-Click Senior-Tel I works almost like a normal cell phone, only much simpler than the cell phone! You can receive any calls and directly dial three telephone numbers you have predetermined. Mobi-Click Senior-Tel I is suitable as an emergency call system for elderly or disabled people.
8. Calls to Senior Tel I ………………………………………………………………………….……………...…………..……………….………………………………………….. 9. Volume control and ringtones ………………………………………………………………………..…………………………………………………..………….. 10. Emergency call function: Number 112 ………………………………………………………..……………………………..………..………….. 11. Key lighting ………………………………………………………………………..………………………………………..………………………………………………………………….. 12. How can I rename my Mobi-Click ?…………………………………….…………..………………………………………………………..………….. 13. Factory setting …………………………………….…………………………………………………………………………………………….………..………...……………...……….. 14. Readiness for action ………………………………………………………………………..………………………………………………………...….….…………………….. 15. Disposal ………………………………………………………………………..…………………………………………………………………………….…………………….….………………..
1. Introduction- How the buttons work On and off button (ON/OFF) speaker Red/Green LED 2 - Battery Red/Green LED 1 - GSM Red button Blue button Port 3.5mm currently no function Green button Mini USB charging microphone...
2. SIM card You need an active standard SIM card from a network operator, which is not included in the scope of delivery, so that every user can choose their favorite mobile phone network. The Senior Tel I has a dual-band GSM module. Therefore almost all European SIM cards can be used.
Page 6
Senior-Tel I has an integrated circuit to protect the battery Commissioning of Senior Tel I: Open the flap in the rear wall from overcharging, undercharging and short circuits. This Open the SIM card holder protection circuit is activated with a small slide switch. To ...
3. Charging the device Senior-Tel I. Senior – Tel I is equipped with a mini USB cable and USB power supply. Mini USB cable USB power supply Connect the USB power adapter to the USB socket. On Senior – Tel 1 the red LED should light up to indicate that the device is charging.
Page 8
The Senior-Tel I is characterized by a wide range of programming options and allows the device functions to be adapted to the user's various requirements. If you get stuck during the programming process, the Senior-Tel I can be restarted by moving the slide switch to the OFF position for approx.
Step 1 your operator. First insert the new SIM card, which you later want to use with Mobi-Click Senior-Tel I, into a Insert new SIM card into “normal” cell phone. normal mobile phone.
When the device has found a network, a tone sounds after 20-60 seconds, then Senior-Tel I is fully operational and the green network LED starts flashing..it is switched on and the battery is charged. Mobi-Click Senior-Tel I ...the SIM card ...there is perfect GSM was inserted reception.
Save the three telephone numbers With Mobi-Click Senior-Tel I you can dial 3 different numbers without the hassle of typing in the numbers: just press one of the three colored buttons and you will be connected directly to the number you want! Before you can benefit from this speed dialing, the three numbers must first be saved.
Page 12
Since Mobi-Click Senior-Tel I only has three dial buttons and an on/off button, most of the settings must be made using a cell phone. This happens according to a very simple principle. Command to save the three telephone numbers. Write an SMS on your mobile phone and send this SMS to your device's phone number Senior-Tel with the following text.
Page 13
Deleting set telephone numbers. To delete all set telephone numbers, you have to do the following Send command: #1513 RESET (DISTANCE) (DISTANCE) To check whether all set phone numbers are saved, you have to send the following command #1513 TEST (DISTANCE) (DISTANCE)
7. My first phone call with Senior-Tel I. Press red button to connect to phone number RED Then the green button will light the pressed short beep up - the button lights when pressing Press the blue button to connect to the phone number BLUE connection is the button active.
If the call is answered automatically (see above), you can hear your loved one without pressing any buttons. Mobi-Click Senior Tel I automatically accepts the call and sets the loudspeaker to loud (hands-free).
9. Volume control and ringtones As with all other mobile phones, you can also use the Senior-Tel I to set individual ring tones and adjust your own volume. AUDIO #1513 (DISTANCE) (DISTANCE) (DISTANCE) ( (DISTANCE) (DISTANCE) (DISTANCE) Speaker volume [0-9] Microphone volume [0-9] Melody number [0-9] Melody volume [0-9]...
Page 17
: SET AUDIO #1513 Example (DISTANCE) (DISTANCE) (DISTANCE) (DISTANCE) (DISTANCE) (DISTANCE) You can check the settings at any time. Just send the following SMS: AUDIO #1513 TEST (DISTANCE) (DISTANCE) In response, you receive an SMS with the current settings. If you are not satisfied with the settings you have introduced, you can reset them to factory defaults by sending an SMS below: RESET AUDIO...
Page 18
Most users of the SeniorTel device use it as a regular phone, so the hands-free mode is turned off by default. At any time when you are talking from a distance from the phone, you can turn on the hands-free mode by pressing the blue button during the call.
10. Emergency call function: number 112 The emergency call (SOS) 112 Triggering the emergency call 112: Press the red button 1 time Press the red button once again within 3 seconds Press the blue button twice within 3 seconds If the emergency call 112 is triggered, the green button 3 lights up and 3 beeps follow. The emergency call can be interrupted at any time by pressing the on/off button.
11. Key lighting For people who use the device and have difficulty seeing, it is possible to switch on the backlighting of the keys. The backlight turns on automatically when movement of the device is detected. That is, it is enough for the user to take the SeniorTel device in his hand, then the backlight of the buttons will turn on for a previously set time in the range of 5 to 30 seconds.
You can also change the name of the Senior Tel I. Every time an SMS is sent to you from Senior-Tel I, the first line of the message will contain the name of your Mobi-Click device, namely "Senior-Tel 4.03". This number indicates the current software version, because in addition to the Senior-Tel I there is also the so-called Senior-Tel II.
13. Factory setting In the event that your Senior Tel I does not send or emit clear messages, be it acoustic or visual, or other problems occur, you can reset the device to the factory settings. As a rule, this eliminates the problems that have arisen. ...
14. Readiness for action If you have completed all the previous steps, your phone is configured and ready for use. 15. Disposal a) Produkt Electronic devices are recyclable materials and do not belong in household waste. Discard the product on End of life in accordance with applicable legal regulations.
16. Declaration of Conformity We, MOBI - CLICK, representative Germany, Karl-Liebknecht-Str. 60, 15230 Frankfurt(Oder), declare under full responsibility that the product: Smartphone and security system Mobil-Click Senior – Tel I (suitable for GSM 850/ 900/ 1800/ 1900; to which this declaration refers, the following basic provisions of the directive of the Council of the European Union 1995/5/EC: Articles 3.1 a.), 3.1.b) and 3.2.
17. Technical data Temperature range: Working range at least -10°C to +55°C Storage range: at least -25°C to +80°C Weight: 92g (with integrated battery) Dimensions: 116mm x 42mm x 21mm (LxWxH) Operating voltage: 3.3 volts to 4.2 volts (nominal 3.6 volts) Standby time: min.
Page 28
Important! Before commissioning, the slide switch must be set from OFF to ON! Only then can you charge the battery! The slide switch is located under the Simkaternhalter...
Need help?
Do you have a question about the Senior Tel 1 and is the answer not in the manual?
Questions and answers