Subscribe to Our Youtube Channel
Related Manuals for Tera HW0015
Summary of Contents for Tera HW0015
- Page 1 Model: HW0015 Wireless 2D Barcode Scanner with Display and Charging Base User Manual Ver. 08.1.02...
-
Page 2: Connect The Scanner
Connect the Scanner Connect with Charging Station 1. Press the button to power up the scanner. 2. Plug the charging station into a working USB port on the computer. (If the scanner emits three beeps after scanning a barcode and nothing appears on the computer screen, please follow the instructions in the “Pair the scanner with its Station”... -
Page 3: Charging Instructions
Charging Instructions Please Read Before Charging Power Requirements: This scanner charges by sitting on the charging station. The charging station should only be connected to a 5V/1A power source. It is essential to use a power source that provides a stable 5V/1A output. Using a power source with higher voltage or amperage may damage the device and void the warranty. - Page 4 Please do not hesitate to contact us if your have questions. Customer Service Email: info@tera-digital.com Phone: +1 (626) 438-1404 Note: When contacting the Tera support, please have the following information available: Serial number of the unit (found on manufacturing label) Model number (found on manufacturing label) Follow us:...
-
Page 5: Table Of Contents
Contents Factory Reset .............. Beeper Volume ............Battery Level ............... Vibration ..............Power Timeout Timer ..........Keyboard Layout ............Operation Modes ............Pairing the Scanner with its Charging Station ..Pairing the Scanner with Bluetooth Devices ..... Enter/Tab Suffix ............Timestamp .............. -
Page 6: Factory Reset
The beeper volume codes modify the volume of the beep the scanner emits on a good read. High Medium* Mute Battery Level To check the remaining battery level, please scan the following barcode. Ensure your cursor is in a text field when scanning. Show Battery Level Need Support? info@tera-digital.com https://www.tera-digital.com +1(626)438-1404... -
Page 7: Vibration
Vibration The scanner vibrates once when a barcode is successfully read. To disable the vibration, scan the Vibration Off barcode. Vibration On* Vibration Off Power Timeout Timer When there is no activity within a specified time period, the scanner turns off. Scan the appropriate scanner power timeout barcode to change the timeout duration. -
Page 8: Operation Modes
Italy United Kingdom Operation Modes Real Time Mode By default, the barcode scanner is in real time mode, transmitting scanned data to the host device immediately. Real Time Mode* Storage Mode Storage mode allows the scanner to store barcode data when it's out of range of its receiver or during inventory. -
Page 9: Pairing The Scanner With Its Charging Station
Total Records If you wish to output the total number of barcodes scanned when in storage mode, scan Total Records. Total Records Clear All Stored Codes If you want to clear the scanner's buffer of all data accumulated in storage mode, scan Clear All Stored Codes. Clear All Stored Codes Pairing the Scanner with its Charging Station If the scanner doesn’t connect to the charging station automatically,... -
Page 10: Enter/Tab Suffix
If you want to record the time and date for every scan, scan either Time & Date Prefix or Time & Date Suffix. Show Current Time & Date Time & Date Prefix Time & Date Suffix Clear Timestamp Report missing or damaged items? info@tera-digital.com https://www.tera-digital.com +1(626)438-1404... -
Page 11: Removal Of Characters
Removal of Characters If you need to remove leading and/or trailing characters from scanned bar codes, please follow these steps: 1. Scan the “Remove characters from the start” barcode or the “Remove characters from the end” barcode Remove characters from the start Remove characters from the end 2.Scan the appropriate code from the digit codes below：... -
Page 12: Scan Modes
A scan mode for reading barcodes by pulling the trigger. Manual Trigger Mode Continuous Scan Mode A scan mode where the scanner constantly scans barcodes without the need to press the trigger. Continuous Scan Mode For returns, contact us! info@tera-digital.com https://www.tera-digital.com +1(626)438-1404...
Need help?
Do you have a question about the HW0015 and is the answer not in the manual?
Questions and answers
Is it possible to have scanner base plugged itnto a usb port but have another charger unit approximately 25 ft away? The location we need to use scanner is located that far away from our computer system. We have tried it and scanner works fine we just have an issue where our team members have to walk to pc area to get scanner everytime they need it. obviously if they leave it in area they need to use it it will go dead from not being on the charger. we use the tera hw0015.
No, the Tera HW0015 scanner should be connected to a known working USB 3.0 port on your computer using the provided USB cable, which typically does not support reliable operation at 25 feet due to USB length limitations.
This answer is automatically generated