Table of Contents
Advertisement
Network Discovery
2
Type the new read-only or read/write community string in the appropriate
field.
3
Click Change.
Set the time zone
Note:
You must set the time zone when you first configure Network Discovery .
Changing to the appropriate time zone will allow Network Discovery to adjust
the local time relative to Coordinated Universal Time. Network Discovery will
also calculate daylight savings time automatically as appropriate.
The default time zone is Canada/Eastern.
Warning:
To change the time zone
1
Click Administration > Appliance management > Time zone.
2
Select the correct time zone from the scroll list.
3
Click Change.
78 | Appliance Management
The time zone must be set when the Peregrine appliance is first set up.
If the time zone has not been set, or if you change the time zone, the
Network Map may not be updated for a period equal to the difference
between the two time zones.
Advertisement
Table of Contents
