Table of Contents
Advertisement
To restore your data from an internal backup
1
Click Administration > Backup and restore > Restore from internal
backup.
2
You can choose whether or not you will keep your current scan files if there
are none in the backup.
3
If Network Discovery has been set up for e-mail, choose whether or not an
e-mail notification will be sent and to whose account.
4
Click Restore.
Network Discovery will not respond for a short period. This is normal.
5
You can check the restore log by clicking Administration > Backup and
restore > View restore log.
Restoring from an FTP site
If you have configured Network Discovery to back up an FTP site, you can use
this procedure to restore your data.
Important:
To restore your data from an FTP site
1
Click Administration > Backup and restore > Restore from FTP.
2
You can choose whether or not you will keep your current scan files if there
are none in the backup.
3
If Network Discovery has been set up for e-mail, choose whether or not an
e-mail notification will be sent and to whose account.
4
Click Restore.
5
When the restore is complete, you can check the restore log by clicking
Administration > Backup and restore > View restore log.
It is your responsibility to ensure that the username has read/write
permission for the FTP directory.
Setup Guide
Restoring your data | 137
Advertisement
Table of Contents
