Table of Contents
Advertisement
RECORDING FUNCTION
It may be unlawful to record play back copyrighted materi-
al without the consent of the copyright owner.
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette, remove its record safe-
ty tab. To record on it later, cover the hole
with cellophane tape.
Before recording, make sure:
• The desired channel is selected by pressing [Number] or
(
)
the [CHANNEL
cable box or satellite box as in "VCR to TV Connection"
on page 3, select the VCR to channel 3, the same chan-
nel as the RF output channel of the VCR. Then, select
the channel you want to record at the cable box or satel-
lite box. In this case, you can ONLY record and view the
SAME channel. )
• There is a tape with its safety tab into the VCR.
• The desired recording speed is selected in SP(standard
play) or SLP(super long play) mode by pressing
[SPEED] on the remote control.
Tape Speed
Type of tape
SP mode
SLP mode
Viewing and Recording the Same Program
1
Begin the recording by pressing [RECORD].
• To temporarily stop recording or resume it, press
[PAUSE/STILL]. After the VCR has been in Pause
mode for 5 minutes, it will stop automatically to pro-
tect the tape and the video head from damage.
2
Press [STOP] when recording is completed.
Record safety tab
]. (If you connected the VCR to a
Recording/Playback Time
T60
T120
1hour
2hours
3hour
6hour
TIMER RECORDING
You may set the VCR to start recording while you are
away. You can set eight programs to record on specific
days, daily or weekly within a 1 year period.
1
Insert a tape with its safety tab into the VCR.
2
Select main menu by pressing [MENU].
Select "TIMER PROGRAMMING" by pressing
3
[PLAY] or [STOP]. Then, press [F.FWD].
• If you have not yet set the clock, "CLOCK SET"
appears. If so, continue with the step [3] in "CLOCK
SET UP" section. Then, set the timer recording.
4
Set the timer.
Set the program number (1~8)
Program number which is not set up flashes.
Press [PLAY] or [STOP] repeatedly for the
desired program number.Then, press [F.FWD].
Select once, daily or weekly recording
For once: Press [PLAY] or [STOP] to point to "ONCE".
For daily (Monday~Friday): Press [PLAY] or
[STOP] to point to "DAILY".
T160
For weekly: Press [PLAY] or [STOP] to point to
2-2/3hours
"WEEKLY".
8hour
Then, press [F.FWD].
Set the date
First, press [PLAY] or [STOP] for the month. Then, press [F.FWD].
Next, press [PLAY] or [STOP] for the day. Then, press [F.FWD].
Set the start time
First, press [PLAY] or [STOP] for the hour. Then, press [F.FWD].
Next, press [PLAY] or [STOP] for the minute. Then, press [F.FWD].
And then, press [PLAY] or [STOP] for AM or PM. Then, press [F.FWD].
Set the end time
Follow the instructions of "Set the start time" to set the end time.
Set the channel number
Press [PLAY] or [STOP] repeatedly for the desired channel number.
Then, press [F.FWD].
If you connected the VCR to a cable box or satellite box as in "Connect
VCR to TV" on page 3, select the VCR to channel 3 or 4 the
same channel as RF output channel of the VCR.
Then, select the channel you want to record at the cable box or satellite box.
Leave the cable box or satellite box on for timer recording.
Set the tape speed
Press [PLAY] or [STOP] repeatedly for the
desired tape speed.
Then, press [F.FWD].
• To go back one step, press [REW].
5
To set another program, repeat step [4]. To exit,
press [C.RESET/EXIT].
Press [POWER] to set the timer. The TIMER indi-
6
cator on the VCR comes on. TIMER RECORDING
WILL NOT BE ACTIVATED UNLESS YOU TURN
THE VCR OFF.
– 5 –
PROGRAM NUMBER 4
DATE
- - / - -
START TIME - - : - -
- -
END
TIME - - : - -
- -
CHANNEL
- -
REC SPEED - -
PROGRAM NUMBER 4
ONCE
DAILY
WEEKLY
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE
05/12 MON
START TIME 07:30
PM
END
TIME 08:30
PM
CHANNEL
16
REC SPEED SP
SP
SLP
EN
Advertisement
Table of Contents
