Table of Contents
Advertisement
To Change the On-Screen Language
1
Press [MENU] until the main menu appears.
2
Select "LANGUAGE SELECT" by pressing [PLAY]
or [STOP]. Then, press [F.FWD].
3
Select "ENGLISH" , "FRANCAIS" or "ESPAÑOL"
by pressing [PLAY] or [STOP]. Then, press
[C.RESET/EXIT].
• If you accidentally select Spanish or French and need English:
Press [MENU] and choose SELEC. IDIOMA, or SELECTION
LANGUE. Press [F.FWD], and select
[C.RESET/EXIT].
Clock Set Up
1
Select main menu by pressing [MENU].(If the clock
is not set, the CLOCK SET menu appears first. In
this case, follow step [3].)
Select "CLOCK SET" by pressing [PLAY] or
2
[STOP]. Then, press [F.FWD].
3
Set the clock.
Set the month
Press [PLAY] or [STOP] repeatedly.
Then, press [F.FWD].
Set the day
Press [PLAY] or [STOP]repeatedly.
Then, press [F.FWD].
Set the year
Press [PLAY] or [STOP] repeatedly.
Then, press [F.FWD].
The day of the week will appear automatically.
Press [PLAY] or [STOP] repeatedly.
Set the hour
Then, press [F.FWD].
Press [PLAY] or [STOP] repeatedly.
Set the minute
Then, press [F.FWD].
Press [PLAY] or [STOP]
Set the AM
repeatedly.
or PM
• To go back one step, press [REW].
4
Start the clock by pressing [C.RESET/EXIT] or [F.FWD].
PLAYBACK FUNCTION
Normal Playback
1
Insert the prerecorded tape. The VCR will
turn on. If the safety tab has been removed,
the VCR will start playback automatically.
2
Turn on the TV and set the TV to channel
3. If channel 3 is already occupied for broadcasting,
change the RF output to CH 4, and change the TV chan-
nel to CH4.
(See "RF Output Channel" on page 3 for the detail.)
3
Begin playback by pressing [PLAY].
• Tracking adjustment will be set automatically (Digital
Tracking function) when you start playback.
• You cannot manually adjust the tracking of a Still pic-
ture. However, you may press [CHANNEL
the remote control to remove vertical jitter in a Still
picture.
• When a tape has reached the end, the VCR will
rewind the tape to the beginning, eject the tape, and
turn off the VCR automatically.
To stop playback, press [STOP].
4
Counter Reset
• You can reset the counter by pressing [C.RESET/EXIT]
on the remote control.
ENGLISH. Finally, press
CLOCK SET
MONTH DAY
YEAR
03 / 17
MON 2003
HOUR MINUTE AM/PM
05
: 40
PM AM
PM
(
)
] on
– 4 –
Still / Slow
You can freeze the picture on TV screen by pressing
[PAUSE/STILL] during playback.
• You can advance the picture by one frame at a time by
pressing [PAUSE/STILL] during the still mode.
• If the picture begins to vibrate vertically during the still
mode, stabilize the picture by pressing [CHANNEL
] on the remote control.
• If the picture is distorted or rolling vertically, adjust the
vertical hold control on your TV, if equipped.
You can see the slow motion by pressing [SLOW] during
playback or the still mode.
• If the noise bar appears on the TV screen, you can
reduce it by pressing [CHANNEL
control.
• After the VCR has been in Still/Slow mode for 5 minutes,
it will stop automatically to protect the tape and the video
head from damage.
• To return playback, press [PLAY].
Auto Repeat Playback
This feature allows you to play a tape over and over.
1
Select main menu by pressing [MENU].
2
Select "AUTO REPEAT" by pressing [PLAY] or
[STOP].
3
Begin auto repeat playback by pressing [F.FWD] so
that [ON] appears next to "AUTO REPEAT".
• If the on-screen menu still remains, press
[C.RESET/EXIT] to exit the menu.
• To cancel the Auto repeat mode, press [F.FWD] at step
[3] so that [OFF] appears next to "AUTO REPEAT".
Search Functions
Picture Search
If you want to skip or repeat a scene during playback, press
[F.FWD] or [REW].
• Press it again and the VCR will now search in super high
speed. (in the LP/SLP modes only)
Index Search
An index mark will be assigned at the beginning of each
recordings you make. You may skip to a specific marked
point by following the steps below .
1
Press [SEARCH-MODE] so that the Index Search
menu appears.
2
Enter the number of recordings
you wish to skip by pressing
[PLAY] or [STOP] within 30 seconds.
3
Press [F.FWD] or [REW] to start index search. If
you want to go in the forward direction, press
[F.FWD]. If you want to go in the reverse direction,
press [REW].
• After index search, the VCR will play the tape auto-
matically.
Time Search
This feature allows you to go to a specific point on a tape
by entering the exact amount of time you wish to skip in
order to reach the point.
1
Press [SEARCH-MODE] so that the Time Search
menu appears.
2
Enter your desired time to skip
by pressing [PLAY] or [STOP]
within 30 seconds.
Press [F.FWD] or [REW] to start
3
time search. If you want to go in the
forward direction, press [F.FWD].
If you want to go in the reverse
direction, press [REW].
• After time search, the VCR will play
the tape automatically.
(
)
(
)
] on the remote
INDEX SEARCH
03
TIME SEARCH
2 : 50
EN
Advertisement
Table of Contents
