Page 1
Outdoor Side Table w/ Built-in Planter Assemby and User Manual Model: FRN-M99436 Item: M99436...
Page 2
Planter Holder Table Leg Table Top Long Leg 1 Long Leg 2 Bottom Shelf Plastic Planter M6×12mm Bolt M6×38mm Bolt Wrench WARNING: Do not stand on table. The weight limit for the table is 44lbs. Do not exceed 11lbs for the plastic planter (G).
Page 3
Assembly Step 1: Attach the legs (B) to planter holder (A) using bolt (H) and wrench (J). Do not over tighten.
Page 4
Assembly Step 2: Connect table top (C) to planter holder (A) using bolt (I) and wrench (J). Do not over tighten. Step 3: Attach the long leg 1 (D) and The long leg 2 (E) to table top (C) and then assemble using bolt (H) and wrench (J).
Page 5
Assembly Step 4: Connecting the bottom shelf (F) to legs like the above drawing using bolt (H) and wrench (J). Do not over tighten.
Page 6
Assembly Step 5: Turn over and then Insert the plastic planter (G) into the planter holder (A). Finally, tighten all bolts. Step 6: Adjust the leveling feet if necessary.
Page 7
Part Description Part No. Table Leg TBLEG-FRN-M99436 Long Leg 1 LEG1-FRN-M99436 Long Leg 2 LEG2-FRN-M99436 Plastic Planter PLTR-FRN-M99436 Hardware HDW-FRN-M99436 Leveling Feet LVL-FRN-M99436...
Need help?
Do you have a question about the FRN-M99436 and is the answer not in the manual?
Questions and answers