support.dell.com
b.
Push the latch lock to the unlocked position, and slide the latch release in the
direction of the arrow shown in Figure 2-2. Keep holding the latch release
with one hand while pulling the device out of the media bay with the other.
latch lock
(unlocked position)
bottom of computer
Figure 2-2. Removing a Device From the Media Bay
3.
Install the new device in the media bay.
Insert the device into the media bay and push the latch lock back into the locked
position.
4.
Reboot the computer.
Using the MegaBay
The MegaBay, located on the right side of the front of the computer, supports the
following devices:
•
Main battery
•
Zip drive
•
Second hard-disk drive
When you receive your computer, the main battery is installed in the MegaBay.
NOTICE: Do not change devices while the computer is connected to a port
replicator. The docking connector can be irreparably damaged.
optional device
in media bay
Options and Upgrades
latch
release
2-3