Hawkeye Mfg LITTLE PILOT Quick Start Manual

www.cnfpv.com
1. Specifications and Features :
Display
resolution
Backlight
Brightness
LED Screen
Aspect ratio
Response
time
Color system
Input Signal
128.5mm×83.5mm×16.8mm
Monitor size
Specification
Gross weight
5.8G Sensitivity
Battery Battery life
Video RAM Resolutions PAL: 720*288 ;NTSC: 720*240
SD Card
2. Frequency Group Selection :
Button name
Record
Adjustment button(+)
Adjustment button(-)
Power/Menu button
小飞手
LITTLE PILOT
3. 3. Recording ：
1. Insert SD card, 8-32G, C10.Note: It is
800×480
recommended to equip a SD card separately and do not recommended to equip a SD card separately and do not
LED
mix it with other equipment. Suggest Micro SD mix it with other equipment. Suggest Micro SD
1000 Lux
Card :Sandisk C10. Card :Sandisk C10.
2. Format SD card in the monitor for the first time to use.
16:9 / 4:3
3. Make sure you are in FPV interface.
<10ms
4. Press Record / OK button, an red R will be shown:
PAL/NTSC
Video （ PAL/NTSC ）
220g
-94dB
5. Press again to stop record.
About 2.5-3 hours
6. Note: In Snow signal, the DVR won't record; until
the video is in. the video is in.
8-32G C10
7. When in External video interface, the monitor will
record the external video. record the external video.
8. Note: The video was buffer in to the SD card,
when the wireless signal is not stable, it will cause frame when the wireless
drop. drop.
9. Note: How to format SD card please bar code
check below. When format the SD card,the little pilot will check below. When format the SD card,the little pilot will
allocate the storage of the SD card. When you check on allocate the storage of the SD card. When you check on
computer, the SD card will show "full", that's normal, computer, the SD card will show
KEEP CALM. KEEP CALM.
1. Record /OK button
2. Increase button / Auto channel search button / Hot
3. Power / Menu button
4. Decrease button / Channel switching / Hot key for
5. video input / output
(Whitevideo_in; Yellowvideo_out; Redaudio_out)
6. Battery charging status LED (will turn off when the
7. OTGcharge port
(usb-2a/5v, 2S, 3S battery charging is supported)
8. SD card slot
Function
Start/Stop record /
Item increase Press 2 seconds for Auto channel search in FPV Press 2 seconds for Auto channel search in FPV//Hot key for BAND
Item decrease Press 2sec to switch channel/ Hot key for FREQ
Enter menu
key for BAND
FREQ
battery is fully charged)
Shortcut function
Start/Stop record / confirm format
Press 3 seconds to Power on/off
4. Bad SD Card Bad SD Card ：
When detected bad SD card, the Little Pilot will pop up a menu; When detected bad SD card, the Little Pilot will pop up a menu;
Please power off and then change a good SD card(Sandisk Please power off and then change a good SD card(Sandisk
C10).
5. Video Buffer Playback Video Buffer Playback ：
In FPV interface, press and hold In FPV interface, press and hold - button for 2 seconds,
the monitor switch to DVR interface . You can use Record/OK the monitor switch to DVR interface . You can use Record/OK
button to playback the video .Press Menu button to delete button to playback the video .Press Menu button to delete
current file , Record/OK button to confirm. current file , Record/OK button to confirm.
Video buffer is only designed to track the lost drones.The Video buffer is only designed to trac
video quality is not so good. video quality is not so good.We suggested: VLC Player on
computer. computer.
6. FAQ: FAQ:
Note ： ： Reset all the settings in the menu if you meet any
problem. problem.
Not able to search channels automatically: Not able to search channels automatically:
 Auto channel scan only functions in the FPV
interface.
The video displayed is black The video displayed is black-and-white:
 Check whether the camera output is black-and-
(some cameras might automatically shift to black
and-white in low-light conditions)
Can not Can notpower on:
 Hard Reset the machine by pressing the reset
button .
No channel can be received: No channel can be received:
 Install antennas, and move the monitor close to the
5.8 GHz transmitter.
 Connect video signal to the transmitter.
Voltage and time do not display: Voltage and time do not display:
 Make sure the OSD is "ON" .
 Reset the monitor.
Frame Drop in playback Frame Drop in playback:
Its normal case. When the wireless signal is not stable, it Its normal case. When the wireless signal is not stable, it
will cause frame drop.Video buffer is only designed to track the will cause frame drop.Video buffer is only designed to track the
lost drones. lost drones.
Playback on computer: Playback on computer
 Please set the player to 4:3 size.
 Player we suggested: VLC Player.
7. Scan for new firmware: Scan for new firmware: