Advertisement
Quick Links
Hawkeye 4K Split Cam Gyroflow
Hawkeye 4
https://drive.google.com/drive/folders/1XLbuvNtaI_TMwUNXt3IyAQCTfpoukCY-?usp=sharing
https://drive.google.com/drive/folders/1XLbuvNtaI_TMwUNXt3IyAQCTfpoukCY
1
V4.5
Low latency TV output
WDR
Video repair
RC trigger to capture
V4.5
Newst Manual:
Cam Gyroflow
?usp=sharing
www.CNfpv.com
www.CNfpv.com
Advertisement
Related Manuals for Hawkeye Mfg 4K Split Cam Gyroflow V4.5
Summary of Contents for Hawkeye Mfg 4K Split Cam Gyroflow V4.5
- Page 1 www.CNfpv.com www.CNfpv.com Hawkeye 4 Hawkeye 4K Split Cam Gyroflow Cam Gyroflow V4.5 Low latency TV output Video repair RC trigger to capture V4.5 Newst Manual: https://drive.google.com/drive/folders/1XLbuvNtaI_TMwUNXt3IyAQCTfpoukCY https://drive.google.com/drive/folders/1XLbuvNtaI_TMwUNXt3IyAQCTfpoukCY-?usp=sharing ?usp=sharing...
- Page 2 www.CNfpv.com Contents Safety Guidelines： ......................3 Features (Split) ： ......................4 Buttons: ...........................9 Format SD Card: ......................9 PC CAM: ........................10 Video Settings: ......................10 Photo Settings: ....................... 11 System Settings: ......................11 Triggers: ........................13 Installation: ........................13 Record videos: ....................... 13 Transferring Files: ......................
- Page 3 www.CNfpv.com Safety Guidelines： Please read the instruction manual carefully before using the camera for the first time. Please check the latest version manual on our website. 1.It’s a high-precision product, do not drop or crash it. 2.Do not expose the camera to strong magnetic objects, such as magnets or electrical motors.
- Page 4 www.CNfpv.com Features (Split) ： 1S solder pads: Type C ， USB SD card + (3.7V) (GND) Trigger 1 Trigger 2 Battery voltage measure Video GND- Key port Green , Red, Blue LED M2 holds * 2 Power/OK , Mode button SD Protection Cover ：...
- Page 5 www.CNfpv.com Wires: Red: 5-23V DC input + （ 5V to 5S battery, 6S not allow !Except our 6S power cable! ） (USB CAN ONLY Black: GND Yellow: Video Out White: Battery detect Blue: Video trigger Green: Photo trigger Note: Never connect video/trigger port to power+!!!
- Page 6 www.CNfpv.com 5.8G Hawkeye 4K Split 3D Hawkeye Remote 5-23V Red Cable: Power+ control Board White Cable Black Cable: GND Yellow Cable: Video Voltage Output White Cable: Battery Detect To 3 ways Blue/Green Cable: Trigger POWER BOARD PWM Receiver Battery in(5V-5S) To Battery Note: 6S battery not allow! Except our 6S power cable.
- Page 7 www.CNfpv.com Video pin (Option) : Note: the 3.5mm ear phone port is for Little pilot monitor; other monitors/TV/goggles please us RCA port. New AV cable: For DJI goggles,plug into the DJI goggles 3.5mm earphone port, goggles switch to AV IN:...
- Page 8 www.CNfpv.com LED indicator ： Green Charging LED (off:Full) 4K/2.5K 4 ： 3 Red + Blue 50FPS 2.5K 50FPS 1080P 50FPS Blue 4K 30fps Type C Port: A8,B8 : TV output (Option) OSD key board: Up button: switch to video mode/ Press 5 seconds to format SD card Right: Playback Left: Menu settings...
- Page 9 www.CNfpv.com Performance and Specifications: Resolutions 4K 50FPS(4:3 ,2880*2160) 4K 30FPS/ 1080P 50FPS/ 2.5K 50/30FPS/ 2.5K 50/30FPS 4:3 AV output PAL/NTSC PAL has lower latency! Micro SD card U1 Sandisk recommend SD card supported 8-64G Size 38 ×38 MM 30.5×30.5 M4 holes Weight 19G split cam/ 26.8g nakedcam...
- Page 10 www.CNfpv.com PC CAM: Hold M button, then connect USB to computer for about 8 seconds, the camera will enter PC CAM mode. You can set USB mode (U disk or PC CAM) in the menu. Please watch: https://youtube.com/shorts/iGPOdA0fMCg?feature=share Video Settings: Resolution：...
- Page 11 www.CNfpv.com Sharpness：Strong、Normal、Soft. Contrast：High、Medium、Low. Auto Recording： Off、 On.Note: The camera will turn on and record automatically without pressing button.When you stop recording, you need to press the record button. When the power is suddenly cut off or the stop recording button is not pressed, the file will be damaged.
- Page 12 www.CNfpv.com Frequency：50、60HZ. Light frequency indoor. When the video flickers indoor, change this setting. TV mode：PAL、NTSC. NTSC is 60fps, PAL is 50fps. NTSC is smoother than PAL. TV Sacle：16：9、4：3、 4：3 Full. Adjust the TV output scale. OSD Mode：Off、On. OSD on TV output.OSD on TV output. To disable the OSD, turn this Off.
- Page 13 www.CNfpv.com Triggers: The trigger pins need to be connected to the trigger control cable. Scan to watch. https://youtu.be/ulYC6Mg8_qI Note: Don’t connect the trigger pins to any power. If you want to control it by a MCU, connect it to a 3.3V GPIO through a 1K resistance. Installation: Soft mount is needed between the camera and the drone frame.
- Page 14 www.CNfpv.com Update Firmware: 1.Delete all the files and folders in the SD card(suggest:8G/16G). 2.Download the bin firmware to SD card . 3.Insert the SD card into the camera. 4.Power on the camera and it will update firmware automatically. 5.When updating, the LED will flash. 6.When the update process is finished, the LED will stop flashing.
- Page 15 www.CNfpv.com FCC STATEMENT： This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Page 16 www.CNfpv.com NOTE: Check on www.CNfpv.com for new firmware/Manual updates. For more information please check our Youtube/Facebook/Instagram channel: Hawkeye Firefly Official Youtube Facebook Instagram :...
- Page 17 www.CNfpv.com Software download( Please use this special designed version, we preseted all the settings for this camera): Windows: https://drive.google.com/drive/folders/1XLbuvNtaI_TMwUNXt3IyAQCTfpoukCY-?usp=shar Ios, android: search gyroflow at the market store. Camera set up & tutorials: https://youtu.be/UvgmEo4Zv5E Gyroflow software tutorial: https://youtu.be/Q0Rv532HyX0...
- Page 18 www.CNfpv.com...
- Page 19 www.CNfpv.com (Please Gyroflow settings(system requirement: win10,win11): use our special designed version, we preseted all the settings for this camera) 1.Select video 2. Click Auto sync. The sync points should be very close time number. If the sync points is too different, delete it and sync another point.
- Page 20 www.CNfpv.com Reference screen shot: If you don’t know how to setup the software, just download the preset file and copy to the “ camera_presets ” . https://drive.google.com/file/d/1KAd7YIhuTDILpwd_iewTZFeCpK1fBQiO/view?usp=share_link...
- Page 21 www.CNfpv.com TV Cable： To Camera USB port 3.5mm earphone port can directly To other monitor/TV/goggles please connect to Little pilot Master/DJI: use RCA port: Hold – button for 2 seconds to Please switch to AV IN switch to AV IN...
- Page 22 www.CNfpv.com How to setup menu with monitor /goggles: https://youtube.com/shorts/NWS914nJCBI?feature=share How to replace FPC cable: https://m.youtube.com/shorts/qC4lM-10I5Y...
- Page 23 www.CNfpv.com www.CNfpv.com Remote control to record video 1: Remote control to record video 1: The following example uses Betaflight F405 flight controller to illustrate how to configure The following example uses Betaflight F405 flight controller to illustrate how to configure The following example uses Betaflight F405 flight controller to illustrate how to configure the remote control to turn on/off the video recording function.
- Page 24 www.CNfpv.com Remote control to record video 2: Connect the FC’S LED PIN to Hawkeye 4K naked Blue wire (Video trigger pin). Change the LED pin to GPIO through betafligh command。（Backup all the settings before modify。 ） resource LED_STRIP 1 NONE // turn off LED function resource CAMERA_CONTROL 1 NONE // release CAM function resource CAMERA_CONTROL 1 A00 // set LED（A00 PIN）to cam control save // save settings...
- Page 25 www.CNfpv.com Throttle set middle，pitch push down to trigger recording（Note: don’t push to other direction）。...
- Page 26 www.CNfpv.com The control Board (OPTIONAL):...
- Page 27 www.CNfpv.com How to focus Lens: https://youtube.com/shorts/iGPOdA0fMCg?feature=share...
- Page 28 www.CNfpv.com Notes for Gyroflow : 1.Use essential matrix : 2.Select Dynamic zooming, then there will be no black side. 3.Sync time change to 3-5 second:...
- Page 29 www.CNfpv.com 4.Sync points should be similar number, if its too different, delete it and add a sync point on other point(right click on the mouse). 5.If can’t export video , turn GPU off, change to H.264.
- Page 30 www.CNfpv.com 6.Software require Win 10,11. If can’t open the software, install the VC pack: VC_redist.x64.exe . Download link : https://aka.ms/vs/17/release/vc_redist.x64.exe If you don’t know how to setup the software, just download the preset file and copy to the “camera_presets”. https://drive.google.com/file/d/1KAd7YIhuTDILpwd_iewTZFeCpK1fBQiO/view?usp=share_link...
Need help?
Do you have a question about the 4K Split Cam Gyroflow V4.5 and is the answer not in the manual?
Questions and answers