Related Manuals for Dantherm Cooling CoolCore CC-14-48
Summary of Contents for Dantherm Cooling CoolCore CC-14-48
- Page 1 CoolCore Series ™ Product User Manual DANTHERMCOOLING.COM TECHSUPPORT@DANTHERMCOOLING.COM 864-595-9800 671 SPRINGFIELD ROAD SPARTANBURG, SOUTH CAROLINA 29303...
-
Page 2: Table Of Contents
CoolCore™ series units. COPYRIGHT Copying of this service manual, or part of it, is forbidden without prior written permission from Dantherm Cooling Inc. TABLE OF CONTENTS UNPACKING SAFETY WARNING ......3 MODEL IDENTIFICATION . -
Page 3: General Safety
UNPACKING SAFETY WARNING UNPACKING, HANDLING, AND • The unit is UL recognized and tested INSPECTION to UL 60335-2-40. It will comply where necessary with the safety requirements as Thank you for purchasing a Dantherm defined in UL 60335-2-40 CoolCore™ unit. Please carefully review all handling and installation instructions. -
Page 4: Model Identification
MODEL IDENTIFICATION MODEL IDENTIFICATION CC-48-208-P04 UNIT TYPE COLOR CC-CoolCore 04 - P04 BEIGE 20 - P20 WHITE 28 - P28 MOUSE GREY 00 - CUSTOM CAPACITY 14 - 14,000 Btu/hr 48 - 48,000 Btu/hr VOLTAGE 48 - 48 VDC 208 - 208/3P VAC Color Options 04 - P04 Beige 20 - P20 White... -
Page 5: Model Overview
MODEL OVERVIEW MODEL OVERVIEW COOLING VOLTAGE/ FULL LOAD MIN BREAKER/ WEIGHT PHASE CAPACITY/BTU FREQUENCY AMPS (A) FUSE (A) [KG] 14,000 CC-14-48 48 VDC [kW] [113] 48,000 208/230 VAC, CC-48-208 21.4 [kW] 60hz [222] COOLCORE™ SERIES PRODUCT MANUAL... -
Page 6: Product Description
By dissipating heat from the fluid to the ambient, the system is able to maintain an accurate temperature. IMPORTANT Dantherm Cooling Inc. recommends that the system be powered on continuously and allowed to operate based on control temperature. LIQUID FLOW Warm liquid is drawn in from the electronics. -
Page 7: 0Perations And Controller
OPERATIONS AND CONTROLLER ELECTRONIC CONTROL DESCRIPTION CONTROL STRATEGY This section describes key features of the The controller regulates the fans heater, and optional ACG7 controller, and how it operates. cooling based on desired set points. The optional ACG7 controller is located behind •... - Page 8 OPERATIONS AND CONTROLLER CONNECTIONS CONNECTIONS ILLUSTRATIONS The control board is placed internally alongside This illustration shows the external connections the edge of the unit’s enclosure. This allows to the controller. the internal connections to be inserted to the internal board. This reveals the external connections through the cut out in the sheet metal front plate.
- Page 9 WIRING SCHEMATIC CC-48-208 ACG7 MANUAL LIMIT SURGE PROT. LITTELFUSE 460 HEATER COOLCORE™ SERIES PRODUCT MANUAL...
- Page 10 DO NOT SCALE DRAWING. TOLERANCES THE ELECTRONIC FILE FINI UNLESS OTHERWISE SPECIFIED MAINTAINED AT DANTHERM COOLING INC S:\DRAWINGS IS HIS DRAWING IS FURNISHED WITH THE UNDERSTANDING THAT .120 .000 CONTROLLED. HE ESSENCE THERE OF WILL NOT BE REPRODUCED IN WHOLE OR ANGLES N PART WITHOUT WRITTEN AUTHORIZATION BY DANTHERM INC.
- Page 11 COOLCORE™ UNIT OVERVIEW CoolCore™ CC-14-48 Technical Data UNITS MODEL NUMBER CC-14-48 MOUNTING TYPE Inside UNIT DIMENSIONS 14.5x32x27 Inches [mm] [HxWxD] [369x816x685] WEIGHT Lbs [kg] [159] COOLING CAPACITY 14,000 BTU/h [W] 80°F INTERNAL / 95°F AMBIENT [4.1kW] INPUT VOLTAGE Volts 48 VDC MINIMUM CIRCUIT AMPACITY (MCA) Amps NOMINAL POWER CONSUMPTION...
- Page 12 DO NOT SCALE DRAWING. TOLERANCES THE ELECTRONIC FILE FINI UNLESS OTHERWISE SPECIFIED MAINTAINED AT DANTHERM COOLING INC S:\DRAWINGS IS HIS DRAWING IS FURNISHED WITH THE UNDERSTANDING THAT .120 .000 CONTROLLED. HE ESSENCE THERE OF WILL NOT BE REPRODUCED IN WHOLE OR ANGLES N PART WITHOUT WRITTEN AUTHORIZATION BY DANTHERM INC.
- Page 13 COOLCORE™ UNIT OVERVIEW CoolCore™ CC-48-208 Technical Data UNITS MODEL NUMBER CC-48-480 MOUNTING TYPE Inside UNIT DIMENSIONS 14.5x32x27 Inches [mm] [HxWxD] [369x816x685] WEIGHT Lbs [kg] [159] COOLING CAPACITY 14,000 BTU/h [W] 80°F INTERNAL / 95°F AMBIENT [4.1kW] INPUT VOLTAGE Volts 48 VDC MINIMUM CIRCUIT AMPACITY (MCA) Amps NOMINAL POWER CONSUMPTION...
-
Page 14: Installation | Purging | Maintenance
• After final installation and power supply connection, power the unit and check for correct airflow and fan speeds • Contact Dantherm Cooling for more information if required PURGING The CoolCore™ unit should be filled and purged during initial installation. -
Page 15: Warranty
WARRANTY WARRANTY: This warranty is also subject to the following operating conditions: DANTHERM COOLING, INC., HEAT EXCHANGERS AND AIR CONDITIONING UNITS 1) Voltage variation not greater than 10%, HAVE LIMITED WARRANTY. 2) Frequency variation not greater than 3Hz DANTHERM COOLING, INC. (“DANTHERM”) -
Page 16: Declaration Of Conformity
DECLARATION OF CONFORMITY RETURN MATERIAL AUTHORIZATION DECLARATION OF CONFORMITY PROCEDURE Dantherm Cooling Inc., Spartanburg, SC hereby declare that the units PrecisionAir 50/60Hz are In the unlikely event of unit failure, the following in conformity with the following directives: return procedure shall be adopted. - Page 17 DANTHERMCOOLING.COM TECHSUPPORT@DANTHERMCOOLING.COM 864-595-9800 671 SPRINGFIELD ROAD SPARTANBURG, SOUTH CAROLINA 29303...
Need help?
Do you have a question about the CoolCore CC-14-48 and is the answer not in the manual?
Questions and answers