Related Manuals for Wenglor P1XD002
Summary of Contents for Wenglor P1XD002
- Page 1 Operating Instructions P1XD002 Fiber-optic amplifier Translation of the original operating instructions Subject to change without notice Available as PDF file only Version 2.0...
-
Page 2: Table Of Contents
5.2 Electrical Connection ................................14 6 Settings................................... 16 6.1 Adjustment via Potentiometer............................. 16 6.2 Setting via IO-Link and wTeach2 ............................16 7 Maintenance Instructions ............................. 17 8 Proper Disposal ................................18 9 Declarations of Conformity............................19 Table of Contents | P1XD002 ‒ Fiber-optic amplifier... -
Page 3: General
The safety precautions and warnings are laid out in accordance with the following principle: SIGNAL WORD Type and source of danger! Possible consequences in the event that the hazard is disregarded. à Measures for averting the hazard. 1 ‒ General | P1XD002 ‒ Fiber-optic amplifier... -
Page 4: Limitation Of Liability
• wenglor assumes no liability for printing errors or other inaccuracies contained in these operating in- structions unless wenglor was verifiably aware of such errors at the point in time at which the operat- ing instructions were prepared. -
Page 5: Copyrights
• All rights are reserved by wenglor. • Commercial reproduction or any other commercial use of the provided content and information, in particular graphics and images, is not permitted without previous written consent from wenglor. 1 ‒ General | P1XD002 ‒ Fiber-optic amplifier... -
Page 6: For Your Safety
• The product is not suitable for use in potentially explosive atmospheres. • The product may be used only with accessories supplied or approved by wenglor, or in combination with approved products. A list of approved accessories and combination products can be found at www.wenglor.com on the product detail page. -
Page 7: Personnel Qualifications
Read the operating instructions carefully before using the product. Protect the sensor against contamination and mechanical influences. Approvals and Protection Class IND. CONT. EQ 72HL / E189727 For use in class 2 circuits 2 ‒ For Your Safety | P1XD002 ‒ Fiber-optic amplifier... -
Page 8: Technical Data
Housing Material Plastic, PC Plastic, ABS Plastic, PA Degree of Protection IP50 Connection M8 × 1; 4-pin DIN-Rail mounting 35 mm Output Functions Output Adjustable Parameters Output Push-pull Circuit Error output inactive 3 ‒ Technical Data | P1XD002 ‒ Fiber-optic amplifier... -
Page 9: Housing Dimensions
05 = switching distance adjuster Complementary Products wenglor offers you the right connection and mounting technology as well as other accessories for your product. You can find this at www.wenglor.com on the product details page at the bottom. Scope of Delivery •... -
Page 10: Transport And Storage
• Protect the product against exposure to direct sunlight. NOTICE Risk of property damage in case of improper storage! The product may be damaged. à Storage instructions must be complied with. 4 ‒ Transport and Storage | P1XD002 ‒ Fiber-optic amplifier... -
Page 11: Installation And Electrical Connection
Mounting on a DIN Rail Mounting on a DIN rail is tool-free. Hook the sensor onto the DIN rail and push the sensor down until it clicks into place through the integrated spring. 5 ‒ Installation and Electrical Connection | P1XD002 ‒ Fiber-optic amplifier... -
Page 12: Removal
This allows you to release the sensor up- wards. 5.1.3 Side Mounting (Using Optional Accessories) The Z1XZ001 adapter allows the sensor to be mounted on a table or on the side. 5 ‒ Installation and Electrical Connection | P1XD002 ‒ Fiber-optic amplifier... -
Page 13: Connecting Plastic Fiber-Optic Cables
• Before first use, shorten the plastic fiber-optic cable once with the SW cutting tool or cut it to the de- sired length. • Open the cover and unlock the rocker arm. • Insert the fiber-optic cable into the openings provided as far as it will go. 5 ‒ Installation and Electrical Connection | P1XD002 ‒ Fiber-optic amplifier... -
Page 14: Electrical Connection
Risk of personal injury or property damage due to electric current. Voltage-conducting parts may cause personal injury or damage to equipment. à The electric device may be connected by appropriately qualified personnel only. 5 ‒ Installation and Electrical Connection | P1XD002 ‒ Fiber-optic amplifier... - Page 15 Safety Input Violet Emitted Light disengageable Grey Safety Output Signal Output Magnet activation White Pink Ethernet Gigabit bidirect. data line (A-D) Input confirmation Green/Yellow Encoder 0-pulse 0-0 (TTL) Contactor Monitoring 5 ‒ Installation and Electrical Connection | P1XD002 ‒ Fiber-optic amplifier...
-
Page 16: Settings
To this end, the sensor is connected to a suitable IO-Link master (see product detail page/complementary products). The interface protocol and the IODD can be found at www.wenglor.com in the download area for the respective product. For information on installing and connecting the wTeach2 software and its structure, as well as information on the general functions, see the wTeach2 operating instructions. -
Page 17: Maintenance Instructions
Cleaning and inspection of the plug connections at regular intervals are advisable. Do not clean the product with solvents or cleaning agents that could damage the product. The product must be protected against contamination during initial start-up. 7 ‒ Maintenance Instructions | P1XD002 ‒ Fiber-optic amplifier... -
Page 18: Proper Disposal
Proper Disposal wenglor sensoric GmbH does not accept the return of unusable or irreparable products. Respectively valid national waste disposal regulations apply to product disposal. 8 ‒ Proper Disposal | P1XD002 ‒ Fiber-optic amplifier... -
Page 19: Declarations Of Conformity
Declarations of Conformity Declarations of conformity can be found on our website at www.wenglor.com in the product’s separate download area. 9 ‒ Declarations of Conformity | P1XD002 ‒ Fiber-optic amplifier...
Need help?
Do you have a question about the P1XD002 and is the answer not in the manual?
Questions and answers