Table of Contents
Advertisement
Quick Links
Copyright
Copyright © 2003 by PLANET Technology Corp. All rights reserved. No part
of this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language, in any
form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of PLANET.
PLANET makes no representations or warranties, either expressed or implied,
with respect to the contents hereof and specifically disclaims any warranties,
merchantability or fitness for any particular purpose. Any software described
in this manual is sold or licensed "as is". Should the programs prove defec-
tive following their purchase, the buyer (and not PLANET, its distributor, or
its dealer) assumes the entire cost of all necessary servicing, repair, and any
incidental or consequential damages resulting from any defect in the software.
Further, PLANET reserves the right to revise this publication and to make
changes from time to time in the contents hereof without obligation to notify
any person of such revision or changes.
All brand and product names mentioned in this manual are trademarks and/or
registered trademarks of their respective holders.
FCC Caution
To assure continued compliance. (example-use only shielded interface cables
when connecting to computer or peripheral devices). Any changes or modifi-
cations not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
Following two conditions: ( 1 ) This device may not cause harmful interference,
and ( 2 ) this Device must accept any interference received, including interfer-
ence that may cause undesired operation.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause
radio interference in which case the user may be required to take adequate
measures.
Revision
User's Manual for PLANET 56Kbps PCMCIA Modem Card
Model: ENW-5602
Rev: 1.0 (July, 2003)
Part No. EM-ENW5602v1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Planet ENW-5602
Summary of Contents for Planet ENW-5602
- Page 1 Copyright Copyright © 2003 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
-
Page 2: Table Of Contents
Table of Contents Chapter 1 Introduction 1.1 Features 1.2 Package Content 1.3 Verifying Your System Requirements 1.4 Gathering Tools and Documentations Chapter 2 Driver Installation 2.1 Installing Driver to Windows 95/98/ME 2.2 Installing Driver to Windows 2000/XP/server 2003 2.3 Installing Driver To Windows NT Chapter 3 Specifications 3.1 Technical Specifications 3.2 Environmental Information... -
Page 3: Chapter 1 Introduction
Chapter 1 Introduction The ENW-5602 supports the updated ITU-T V.90 and K56flex protocols that enables 56K accessing capability. ENW-5602 is a powerful multifunctional modem, which can meet any strict requirements for Data/Fax transmission and communication. Compliant with Group-3 Fax, send and receive fax directly from your computer. ENW- 5602 build-in 14.4Kbps fax, combined with fax software, provides convenient and easy... -
Page 4: Package Content
Note: Be sure to retain your proof of purchase, as it is required to receive warranty service. 1.3 Verifying Your System Requirements Before installing the ENW-5602, be sure your computer meets the following requirements: Hardware ü CPU: 166MHz or Faster ü... -
Page 5: Chapter 2 Driver Installation
Make sure the ENW-5602 has been successfully installed in your computer before you start to install the driver. If this is the first time you are installing the ENW-5602 into your computer, Window will automatically detect it and updates the hardware information database. - Page 6 4. Please select the first option and click “Next” to continue. 5. Select “Floppy disk drivers” and click “Next”.
- Page 7 6. Windows will show this screen to prompt you that it found a driver for the device you are installing, please click “Next” to continue. 7. Please click “Finish” to complete the driver installation.
-
Page 8: Installing Driver To Windows 2000/Xp/Server 2003
2.2 Installing Driver To Windows 2000/XP/Server 2003 1. Install ENW-5602 into your PC’s PCMCIA slot and boot up your PC. 2. Windows will detect this modem and use it’s build-in driver (PCMCIA Standard Modem) to install. 3. If you want to install this modem with our driver. Please insert Driver Disk into FDD drive. - Page 9 6. Please click “Next” to continue. 7. Please select the second option and click “Next” to continue.
- Page 10 8. Please click “Have Disk…”. 9. You can click “Browse” to find the driver location. (Assume “A” is your Floppy drive, the driver can be found in A:\). Please click “OK” to continue. 10.Please select the model name and click “Next” to continue.
- Page 11 11.Windows will show this screen to tell you the driver will be install, please click “Next”. 12.Windows will show this screen to prompt you that it found a driver for the device you are installing, please click “Next” to continue.
-
Page 12: Installing Driver To Windows Nt
7. Insert the INF file disk bundled with the fax/modem PC Card to the floppy drive. 8. Enter the path A:\ and press OK button. 9. Press OK to accept the modem type “PLANET ENW-5602 PCMCIA Modem Card”. 10. Press Finish button. -
Page 13: Chapter 3 Specifications
Chapter 3 Specifications 3.1Technical Specifications Product 56Kbps PCMCIA Modem Card Model ENW-5602 Connector For bundle RJ-11 coupler V.90 (up to 56,000 bps, download) K56flex (up to 56,000 bps, download) V.34 + (up to 33,600 bps) V.34 (28,800 to 2,400 bps) V.32bis (14,400/12,000/9,600/7,200 bps) -
Page 14: Environmental Information
Asynchronous full duplex Operating Modes Manual / Automatic answer Hardware CTS/RTS Flow Control Software XON/XOF Line Interface RJ-11, 2-wire dial-up Call Progress Monitoring Call Progress Monitoring Software Control Inter- Hayes compatible AT command set face Operating mode: 5 V, 186 mA (max.) Power Consumption Sleep mode: 5 V, 18.5 mA 3.2 Environmental Information... -
Page 15: Appendix A Selecting Hardware Settings
Appendix A Selecting Hardware Settings When installing a card in an IBM PC compatible computer, it is important to choose settings for the PC Card which do not conflict with any other cards in the computer. Following lists are some of the settings that other cards in your computer may already be using. - Page 16 Computer’s LPT1:, network card, handy scanner, MIDI card, or sound card. Computer’s clock. (only on a PC AT, not a possible choice) VGA or network card. (similar to IRQ2) Network card. Network card.(not a possible choice) Network card or bus mouse. (not a possible choice) Computer’s co-processor.
- Page 17 Part No.:EM_ENW5602v1...
Need help?
Do you have a question about the ENW-5602 and is the answer not in the manual?
Questions and answers