NOTE
•
A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not
liable for any accidents relating to the use of non-standard screws.
•
The wall mount kit includes the installation guide and all necessary parts.
•
The wall mounting bracket is optional. You can obtain optional accessories from your local dealer.
•
The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard
length, it may damage the inside of the product.
•
For more information, please refer to the user manual for the wall mounting bracket.
•
Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the
screen.
•
Remove the stand before installing the monitor on a wall mount by performing the stand attachment in
reverse.
22
CAUTION
•
Disconnect the power cord first. Then move or install the monitor. There is risk of electric shock.
•
Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could
lead to injury. Use an authorised LG wall mount and contact the local dealer or qualified personnel.
•
To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation
instructions.
•
Applying excessive force when tightening screws may damage the monitor. Such damage is not covered by
the product warranty.
•
Use the wall mounting bracket and screws that confirm to VESA standards. Damage caused by the use or
misuse of inappropriate components is not covered by the product warranty.
•
When measured from the back of the monitor, the length of each installed screw must be 8 mm or less.
Need help?
Do you have a question about the 24HR513C-B.AEU and is the answer not in the manual?
Questions and answers