EFILive AutoCal Information For Users page 9

Connecting AutoCal
Using AutoCal
The following instructions describe the functionality and use of your AutoCal
device. The menu structure and entries are based on the Simple Menu structure
as this is the default and recommend mode for most customers.
For the menu selections to be valid, ensure your AutoCal device is connected to
your vehicle's OBDII port.
Licensing a Controller
The first time a flash is performed to a new controller (using the Prog 1 thru Prog 5
or Full 1 thru Full 5 AutoCal menu options shown below) it must be allocated an
available VIN license. To perform the allocation you will be presented with a
question on the AutoCal:
L i c e n s e
E C U N o w ?
A r e y o u
S u r e ?
support@efilive.com
EFILive AutoCal Information for End Users
Press the Ok button on the AutoCal keypad to confirm you
wish to license the controller to the AutoCal device.
Press the Prev Button if you do not want to license the
controller.
This is a final confirmation you wish to allocate the license.
Pressing the Ok button on the AutoCal keypad performs
the license allocation.
Press the Prev Button if you do not want to license the
controller.
- 7 -
www.efilive.com