Introduction; What Is Autocal; Differences Between Flashscan V2 And Autocal; A Flashscan Device Is Required - EFILive AutoCal Information For Users

What is AutoCal?

EFILive's AutoCal device is intended to provide a convenient platform for
professional tuners to distribute custom tunes to their customers. And for their
customers to collect and submit logged data back to the tuner for analysis. It
allows the tuner to update and optimize the original tune without shipping and/or
removing controllers from customers' vehicles.
AutoCal can be configured in a variety of different ways to best suit your tuner's
operational requirements and the needs of their customers. Your tuner may
provide additional support documentation tailored to the specific setup they use for
AutoCal

Differences between FlashScan V2 and AutoCal

There are significant differences between FlashScan V2 and AutoCal for end
users. It is important that both the tuner and the tuner's customer (end user)
understand these differences.
 With FlashScan V2, end users have the ability to create, view, and modify tunes.
With AutoCal, only the tuner has that ability.
 Tunes from multiple sources can be flashed with FlashScan V2, however
AutoCal is limited to flashing tunes provided by a single tuner.

A FlashScan Device is Required

FlashScan is required to create tunes for an AutoCal device. AutoCal devices
cannot create tunes.

Software Requirements

In order to copy files to and from your AutoCal device and your computer, the
EFILive V8 Scan and Tune Application must be installed. The installation of the
software also provides the device drivers for your AutoCal device.
For AutoCal to be functional, the software and firmware used with your AutoCal
will need to match the software and firmware used with your tuner's FlashScan V2
device. Users should only update software and firmware at their tuners specific
request. Updating to software and firmware versions higher than your tuner may
lead to your tuner being unable to offer you support until they update.
EFILive V8 Scan and Tune software can be found here:
http://www.efilive.com/downloads.html
Firmware and Bootblock is managed within V8 Scan and Tune software,
instructions to upgrade firmware and bootblock can be found here:
https://support.efilive.com/kb_article.php?ref=7243-SFGL-2949
support@efilive.com
EFILive AutoCal Information for End Users

Introduction

- 4 -
www.efilive.com