Autocal Information For End Users; Autocal Package Contents; Licensing; Linking Flashscan To Autocal - EFILive AutoCal Information For Users

AutoCal Package Contents

The contents of your AutoCal product may vary due to being supplied directly from
your tuner or parts supplier. At a minimum your AutoCal will be shipped with:
•
EFILive AutoCal hardware device.
•
EFILive OBDII cable (J1962-A to RJ45).
•
EFILive USB cable (USB-A to USB-B).

Licensing

Each AutoCal device ships with one VIN license that may be used for tuning one
engine and one transmission controller.
Tuners can manage the number of available VIN slots they wish their AutoCal
devices to hold. AutoCals will ship with a default maximum VIN slot count set to
1. AutoCals are configurable to a capacity of 221 VIN licenses.
Updating VIN slot limits is at the sole discretion of the tuner. EFILive (and other
parties) cannot provide this service.
Although AutoCal can be used to return a vehicle to stock, doing so will not "reset"
the VIN license that was used to flash the vehicle.
VIN licenses cannot be copied from one FlashScan or AutoCal device to another
device even if a tuner has previously licensed a controller to a FlashScan device.

Linking FlashScan to AutoCal

For an AutoCal device to be functional, your tuner must link the AutoCal to their
FlashScan device.
There are two ways to link an AutoCal device to FlashScan V2.
1. Physically Link AutoCal.
2. Remotely Link AutoCal.
Your tuner will select the most convenient for their business model.
Historically when an un-linked AutoCal device performed its first
controller flash, it would automatically link itself to the Master
FlashScan device that created the file being flashed, thereby linking
itself to that Master FlashScan. That automatic linking is no longer
supported and will not occur under any circumstances.
support@efilive.com
EFILive AutoCal Information for End Users
AutoCal Information for End
Users
- 6 -
www.efilive.com