Table of Contents
Advertisement
3 1/2-Inch Drive Installation
Use the following procedure to install a hard disk drive into
the drive bracket.
Remove the system unit cover.
1.
Remove the 3 1/2-inch drive bracket from the system
2.
unit (see "Removing the 3 1/2-Inch Drive Bracket").
Follow the preinstallation instructions that come with the
3.
device, such as setting jumpers and switches.
Insert the hard disk drive so that the connectors extend
4.
out of the bracket on the same end as the standard
diskette drive connectors.
Align the holes in the hard disk drive with the holes in
5.
the bracket.
Secure the device to the bracket with the four screws,
6.
two to a side, that come with the device.
3-38 Installing Options
Securing a 3 1/2-inch drive
Advertisement
Table of Contents
