Allen + Roth 67954W-6101 Manual page 5

ASSEMBLY INSTRUCTIONS
2. Secure the faucet assembly to the sink with the
quick install nut (C) provided. Push up the quick
install nut (C) to sink and hand-turn to tighten.
NOTE: Do not use wrench as overtightening will
damage plastic nuts.
3. Place the handle assembly (B) through the mounting
holes in the sink.
NOTE: The water inlet end of the hot handle assembly
has a red indicator ring.
2
Sink
Push
up
Sink
3
5
C
Screw
Fig 1
B