Subscribe to Our Youtube Channel
Related Manuals for Guardian 12444
Summary of Contents for Guardian 12444
- Page 1 85390 REV. E CABLE LE LANYARD Parts #: 12444; 12445; 12446; 12447 Instruction Manual Do not throw instructions away. Read and understand instructions before using this equipment.
-
Page 2: Worker Classifications
Always account for fully by testing over a .005” radius steel edge deployed length of lanyard/SRL. Structure must by Guardian only - not included in ANSI or withstand loads applied in the directions OSHA standards for lanyards. Refer to table permitted by the system of at least 1,000 lb on pg. -
Page 3: Components And Specifications
Components and Specifications Snap Hook External Shock Absorber Vinyl Coated Cable Rebar Hooks, optional Part # 12444 Materials Polyester, nylon, and galvanized steel. Part# Length Cable LE Lanyard Description 12444 6 ft (1,8 m) Single Leg Vinyl Coated Cable w/Steel Snap Hook... -
Page 4: Maintenance, Cleaning, And Storage
Maintenance, Cleaning, Limitations and Storage Fall Clearance: There must be sufficient clearance below the work surface to arrest a Cleaning after use is important for maintaining fall before the user strikes the ground or an the safety and longevity of the Cable LE Lanyard. obstruction. -
Page 5: Installation And Use
NOTE Setback distance: As determined compatible with Cable LE Lanyard, and product testing, Guardian Cable are selected by a Competent Person. The LE Lanyards are not required to be selected full-body safety harness MUST be setback any specific distance from the of proper size, and MUST be fitted snugly, leading edge of applicable fall hazard(s). -
Page 6: Safety Information
Safety Information Harnesses and connectors selected must be compliant with manufacturer’s instructions, and WARNING! Failure to understand and must be of compatible size and configuration. comply with safety regulations may result Snap hooks, carabiners, and other connectors in serious injury or death. Regulations must be selected and applied in a compatible included herein are not all-inclusive, are fashion. - Page 7 91102 Rev. B-1 91102 Rev. B-2 91102 Rev. B-3 91102 Rev. B-1 91102 Rev. B-2 91102 Rev. B-3 Guardian Cable LE Lanyard Attach shock absorber end to harness dorsal D-ring. guardianfall.com guardianfall.com ANSI Z359.13, OSHA 1910.140, and OSHA 1926.502 guardianfall.com...
- Page 8 Diagram A - Fall Clearance Diagram B - Connections Fall clearance calculation shown below is based on a standing worker falling directly in-line with anchor point. SAMPLE CALCULATION ONLY. ALWAYS REFER CONNECTOR INSTRUCTIONS PRODUCT-SPECIFIC CLEARANCE INFORMATION. ...
- Page 9 Inspection Prior to EACH use, inspect the Cable LE Lanyard, lifeline, and connection points for signs of deficiencies, including, but not limited to, corrosion, deformation, pits, burrs, rough surfaces, sharp edges, cracking, rust, paint build-up, excessive heating, alteration, broken stitching, fraying, and missing or illegible labels. IMMEDIATELY remove Cable LE Lanyard from service if defects or damage are found, or if exposed to forces of fall arrest.
-
Page 10: Inspection Log
Inspection Log Serial No: Date of First Use: Model #: User: Date: Results/Condition: Inspected By: Next Inspection Date:... - Page 11 Notes...
- Page 12 This warranty is not transferable to any other Guardian service and does not apply to product that is resold after having been put into service. No other person, firm, entity, or the like is authorized to assume or assign for Guardian any other liability in connection with the sale or use of Guardian’s products.
Need help?
Do you have a question about the 12444 and is the answer not in the manual?
Questions and answers