NEC POWERMATE CT 815 Manual page 48

Advanced Menu - Advanced Configuration
Menu Item
Try Other Boot Devices
Floppy Access Control
S.M.A.R.T. for Hard
Disks
Boot-up Num-Lock
Boot to OS/2>64 MB
CPU Serial Number
3-12 Configuring the System
Settings (default is bold)
Yes, No
Select Yes to cause the system to try to boot from
other boot devices if there is a boot failure. Selecting
No causes the boot to be carried out from selected
devices.
Read-write, Read-only
Select Read-write to allow the diskette drive to have
read-write capabilities.
Disabled, Enabled
Select Enabled to use the Self Monitoring Analysis
and Reporting Technology (S.M.A.R.T.) for reporting
a possible problem with an IDE device. After
receiving the warning, the BIOS alerts you to the
problem.
Off, On
Select On to lock the numeric keypad on boot up.
No, Yes
Select Yes to enable a boot to OS/2 if RAM is greater
than 64 MB.
Disabled, Enabled
Controls detection of the processor serial number.