Hard Drive; Network Board; Fax/Modem Board - NEC POWERMATE CT 815 Manual

Instantly Available Technology features the ACPI sleep mode which
maximizes power savings. When in the sleep mode, your system appears
to be off. The power supply and fans are off and the power lamp is amber.
Pressing a key or moving the mouse instantly wakes up your system and
returns it to where you were before placing the system in the sleep mode.
This feature is enabled or disabled by setting jumpers on the system board
(see Chapter 3, "Configuring the System" for information on setting
system board jumpers).
If you have an optional internal or external modem installed, you can use
the Wake On Ring (WOR) and Resume On Ring (ROR) features of your
system. With WOR, your system can be powered up through the modem
from either the Soft Power Off or ACPI modes. The first call through the
modem powers on the system and a second call allows access to your
system.
The ROR feature allows a single call on your modem to resume system
operation and allow you system access. The ROR feature can be used
while the system is in the sleep mode or the ACPI power on state.
See Chapter 3, "Configuring the System," for information on setting the
WOR and ROR features through the system's BIOS. In addition, for the
WOR feature, a cable must be connected to the modem and to the WOR
connector on the system board.

Hard Drive

All systems come standard with a 10-GB or higher Ultra DMA 66/100
hard drive.

Network Board

Some systems come with an Intel
®
3Com 10/100 3C905C TX-M Ethernet network PCI board, or a CNR
network board.

Fax/Modem Board

Some systems come with a V.90 PCI fax/modem board installed in a PCI
slot. Connect your telephone line to this board.
®
Ethernet 10/100 network PCI board, a
Reviewing System Features 1-13