Electrostatic Discharge (Esd) And Esd Protection - NEC VERSA P7500 Series User Manual

Table of Contents

Electrostatic Discharge (ESD) and ESD Protection

WARNING

ESD can damage disk drives, cards, memory modules and other parts. We recommend that you carry out all

procedures in this guide only at an ESD-workstation. If one is not available, provide some ESD -protection by

wearing an anti-static wrist strap attached to any unpainted metal surface when handling parts. If you don't have

one, discharge static electricity from yourself and your clothing by touching a nearby metal surface before handling

any internal components.

Product Storage Environment Guidelines

1. When the product is in use (or powered-on) ,

•

This product is best to be used from 15 degrees C to 25 degrees C, though it will operate as normal

from 5 degrees C to 35 degrees C.

Avoid placing the product in a dusty environment as excessive dust might be sucked into the

•

machine body which may reduce the cooling effect.

Do not try to block any ventilation holes as you may cause the product to be over-heated.

•

Do not place the product in a humid environment to avoid rusting or corrosion due to excessive

•

water vapour.

2. When the product is powered-off.

Avoid placing the product for a prolonged time in hot environments (with an excessive temperature

•

of above 60 degrees C) as that can damage the LCD panel or cause the battery pack to explode or

leak.

•

If you plan to keep the product unused for a long period, do charge the battery to full capacity and

then disconnect the battery pack before putting the computer in storage.

Avoid placing the product in extreme cold conditions (below 0 degrees C).

•

- 15 -

Table of Contents