Subscribe to Our Youtube Channel
Related Manuals for Leister VACUUM PLATE 100-LP
Summary of Contents for Leister VACUUM PLATE 100-LP
- Page 1 English VACUUM PLATE 100-LP Leister Technologies AG Galileo-Strasse 10 6056 Kaegiswil Switzerland +41 41 662 74 74 leister@leister.com leister.com...
-
Page 2: Table Of Contents
Table of Contents 1. Important safety instructions Warning Caution Using and handling the cordless tool Service 2. Application Intended use Non-intended use Misapplication 3. Technical data 4. Transport 5. Your VACUUM PLATE 100-LP 5.1 Type plate and identification 5.2 Scope of delivery (standard equipment in the case) Overview of device parts 6. Commissioning your VACUUM PLATE 100-LP Work environment and safety Preparation and commissioning 6.3... -
Page 3: Important Safety Instructions
(Translation of the Original User Manual) Congratulations on purchasing your VACUUM PLATE 100-LP. You have chosen a first-class vacuum testing device. It was developed and produced in accordance with the latest technology in the plastics-processing industry. It has also been manufactured using high-quality materials. Please always store these operating instructions with the device. VACUUM PLATE 100-LP Testing device For more information about the VACUUM PLATE 100-LP and specific instructions in the corresponding manuals for the charger and battery, visit leister.com 1. Important safety instructions Warning Risk of electric shock due to electrical voltage ƒ... -
Page 4: Caution
Caution ƒ The device should only be operated by trained specialists or under their supervision. ƒ Children are not permitted to operate the device. ƒ Carefully observe all national regulations relevant to your specific activity in order to ensure safety and legally compliant operation. Using and handling the cordless tool a. Only charge the batteries with chargers recommended by the manufacturer. A charger suitable for a certain type of battery poses a fire hazard if used with other batteries. b. Only use rechargeable batteries in the power tools that are intended for this purpose. The use of other batteries can lead to injuries and fire hazards. -
Page 5: Application
2. Application Intended use The VACUUM PLATE 100-LP is intended for professional use and is used to check the weld seams for leaks. Die VACUUM PLATE 100-LP is intended for use on flat and pitched roofs, in horticulture and in the swimming pool construction sector. The VACUUM PLATE 100-LP is intended for generating a vacuum in interval operation for a maximum of 2 minutes ON/30 seconds OFF. Material types and thicknesses The VACUUM PLATE 100-LP can be used for testing various types of material such as HD-PE, LD-PE, PVC and TPO. The permissible material thicknesses of the indicated materials are 0.5–3 mm. The user must carry out clarifications and assessments regarding other materials and material thicknesses as part of the test. Use only original Leister spare parts and accessories; otherwise, any warranty or guarantee claims will be invalidated. 2.2 Non-intended use Any other use or any use beyond the type of use described is deemed non-intended use. Misapplication Never use the VACUUM PLATE 100-LP as a lifting tool, e.g. for lifting plates, disks or similar. -
Page 6: Technical Data
3. Technical data VACUUM PLATE 100-LP Li-Ion battery capacity Battery voltage Charging time (battery) max. 65 Idle speed 39 700 Noise level dB (A) 78 (K = 3) mbar Test pressure -0.3 Recommended ambient tempera- °C 0…+35 ture for charging °F +32…+95 Permissible ambient temperature °C -20…+50 during operation and storage °F -4…+122 Compatibility... -
Page 7: Transport
4. Transport Use only the transport box included in the scope of delivery (see scope of delivery) and the handle fitted on the trans- port box for transporting the VACUUM PLATE 100-LP. When transporting the device, store and secure it in a way that prevents any mechanical damage. The device must always be stored in the transport box, otherwise the sealing lip (5) can become perma- nently deformed. The spare battery must always be stowed in the transport box with the contacts facing downwards. In gener- al, unused batteries must be stored in the transport box. Keep unused batteries away from paper clips, coins, keys, nails, screws or other small metal objects that could bridge the contacts. Do not ship/ transport defective batteries. A short circuit between the battery contacts can result in burns or fire. To lift the VACUUM PLATE 100-LP by hand, use the carrying handles (6). -
Page 8: Your Vacuum Plate 100-Lp
5. Your VACUUM PLATE 100-LP Type plate and identification The model and serial number are indicated on your device’s name plate (9). Transfer this information to your operating instructions; in the event of any inquiries to our country subsidiary or your authorized Leister sales and service partner, please always refer to this information. Model: ....................................Serial no.: ....................................Example: 5.2 Scope of delivery (standard equipment in the case) VACUUM PLATE 100-LP version, without battery, without charger: 1 × VACUUM PLATE 100-LP device 1 x VACUUM PLATE 100-LP safety instructions 1 × Original Quick Guide 1 × AMPShare Akku safety instructions 1 × GAL 18V-40 operating instructions 1 × AMPShare manufacturer’s warranty Also available in VACUUM PLATE 100-LP, 18.0V/4.0Ah:... -
Page 9: Overview Of Device Parts
5.3 Overview of device parts 1. Battery 6. Carrying handles 2. Battery release button 7. Viewing window 3. Housing 8. Inlet filter 4. Main switch (On/Off switch) 9. Type plate with model designation and series marking 5. Sealing lip 10. Air outlet... -
Page 10: Commissioning Your Vacuum Plate 100-Lp
6. Commissioning your VACUUM PLATE 100-LP Work environment and safety Warning message Risk of electric shock due to electrical voltage ƒ If the housing is damaged, the battery must be disconnected from the VACUUM PLATE 100-LP imme- diately. ƒ Keep the device away from moisture and wet conditions. Danger of fire and explosion with improper use in the vicinity of explosive gases ƒ Admixtures (e.g. combustible or explosive gases or vapors), traces of oil, oil vapor, grease and dust must not be sucked in. ƒ Any operation in a potentially explosive environment is prohibited. Risk to health due to leak detection agent ƒ... -
Page 11: Preparation And Commissioning
ƒ Visual inspection of the weld seam for leaks ƒ The seam is considered tight if no bubbles occur. ƒ Switch off the device using the main switch (4) and allow to cool down. ƒ Mark and repair areas that are not tight VACUUM PLATE 100-LP Quick Guide Operating Instructions: leister.link/qg-vacuum-plate-100-lp QG VACUUM PLATE 100-LP / Art. 176.934 / 05.2024... -
Page 12: Charger And Battery
7. Charger and battery General safety instructions for power tools – observe the instructions for use and handling of the cordless tool in Section 1.3. The VACUUM PLATE 100-LP is designed for use with the ProCORE 18V 4Ah or CORE 18V 4Ah battery and the GAL 18V-40 charger. Keep the charger away from rain and moisture. Chargers exposed to water increase the risk of electric shock. Read operating instructions Specific instructions on the use of the battery and charger can be found in the relevant documents: AMPShare battery safety instructions, GAL 18V-40 operating instructions and AMPShare manufacturer’s warranty. Read these documents before first use. GAL 18V-40 charger The GAL 18V-40 charger is designed for charging Li-ion batteries of the ProCORE 18V or CORE 18V type. Safety Instructions Read all safety information and instructions. Failure to observe the safety information and instructions may result in electric shock, fire and/or serious injury. -
Page 13: Procore 18V 4.0 Ah / Core 18V 4.0 Ah Battery
ProCORE 18V 4.0 Ah / CORE 18V 4.0 Ah battery The following instructions apply to Bosch Li-ion batteries or those from AMPShare partners. Safety Instructions Read all safety information and instructions. Failure to observe the safety information and instructions may result in electric shock, fire and/or serious injury. Keep all safety information and instructions for future reference. Inserting the battery Push the charged battery into the battery holder until it clicks into place. Removing the battery To remove the battery, press the battery release button and pull out the battery. Do not apply any force. The battery has two locking stages to prevent the battery falling out if the battery release button is pressed accidentally. Battery charge level indicator The green LEDs on the battery charge level indicator show the charge state of the battery. For safety reasons, the charge status can only be queried when the VACUUM PLATE 100-LP is at a standstill. Press the charge level indicator button to display the charge level. This is also possible with the battery removed. If no LED lights up after pressing the button for the charge status display, the battery is defective and must be replaced. Battery type ProCORE 18V... Capacity Continuous light 5 × green 80–100 % Continuous light 4 ×... -
Page 14: Frequently Asked Questions, Causes And Actions Vacuum Plate 100-Lp
Risk of electric shock due to electrical voltage ƒ Remove the battery from the device before opening. Do not bring the device into contact with aggressive substances (e.g. acetone, diluent, etc.).There is a risk of damage to the installed components. ƒ Keep the appliance clean. ƒ Clean cloths must be used to clean the device. ƒ Only use original Leister accessories. ƒ Repairs must only be carried out by authorized Leister service centers. ƒ Leister Service Centers guarantee a professional and reliable repair service within 24 hours with original spare parts in accordance with circuit diagrams and spare parts lists. For more information please visit leister.com... -
Page 15: Service And Repair
10. Service and repair Repairs shall be performed exclusively by authorized Leister sales and service partners. You will find the address of your authorized Leister sales and service partner on the last page of these operating instructions. For more information please visit leister.com. Note ƒ Do not loosen the screws on the motor housing during warranty period. Failure to do so will invalidate the manufacturer’s warranty obligations. ƒ When shipping the battery, take care to ensure correct declaration (hazardous goods). 11. Disposal Do not dispose of electrical equipment with household refuse! Electrical equipment, accessories and packaging should be recycled in an environmentally friendly manner. When you are disposing of our products, please observe the national and local regulations. Used components must be disposed of exclusively through official collection points via sales centers or your VACUUM PLATE dealer. -
Page 16: Declaration Of Conformity
13. Declaration of Conformity Leister Technologies AG, Galileo-Strasse 10, 6056 Kaegiswil, Switzerland confirms that this product fulfills the requirements of the following EU Guidelines in the models that we have made available for purchase: Directives: 2006/42/EC, 2014/30/EU, 2011/65/EU Harmonized EN ISO 12100, EN 60335-1, EN 1012-2, Standards: EN 55014-1, EN 55014-2, EN IEC 63000 Kaegiswil, 07/15/2024 Bruno von Wyl, CTO Pascal Bösch, VP R&D... -
Page 17: Warranty
© Copyright by Leister Warranty ƒ The guarantee or warranty rights granted for this device by the direct distribution partner/salesperson apply from the date of purchase. In the event of a guarantee or warranty claim (verification by invoice or delivery note), manu- facturing or processing errors will be rectified by the sales partner through replacement delivery or repair. ƒ Other guarantee or warranty claims are excluded within the framework of mandatory law. ƒ Damage resulting from natural wear, overload, or improper handling is excluded from the warranty. ƒ Devices that have been converted or modified by the purchaser are not covered by any warranty or guarantee. ƒ Only use original Leister spare parts and accessories; otherwise, any warranty or guarantee claims will be invalidated. Sales and Service Partners Leister Technologies AG Galileo-Strasse 10 6056 Kaegiswil...
Need help?
Do you have a question about the VACUUM PLATE 100-LP and is the answer not in the manual?
Questions and answers