Dell Studio 0K027RA00 Setup Manual page 60

Using Support Tools
5. If a problem is encountered during a test,
a message appears with an error code and
a description of the problem. Write down
the error code and problem description
and contact Dell (see "Contacting Dell" on
page 73).
NOTE: The Service Tag for your computer
is located at the top of each test screen.
If you contact Dell, technical support will
ask for your Service Tag.
6. When the tests are complete, close the test
screen to return to the Choose An Option
window. To exit the Dell Diagnostics and to
restart the computer, click Exit.
58
Starting Dell Diagnostics From the
Drivers and Utilities Disc
Insert the Drivers and Utilities disc.
1.
Shut down and restart the computer.
2.
When the DELL logo appears, press <F12>
immediately.
NOTE: If you wait too long and the
operating system logo appears, continue to
wait until you see the Microsoft
desktop; then, shut down your computer
and try again.
NOTE: The next steps change the boot
sequence for one time only. On the next
start-up, the computer boots according to
the devices specified in the system setup
program.
Windows
® ®