NEC MultiSync LCD6520L User Manual page 9

4. Ventilation Requirements
When mounting in an enclosed space or recessed area,
leave adequate room between the monitor and the
enclosure to allow heat to disperse, as shown below.
5. Prevent Tipping
When using the display with the Tabletop Stand fasten the
LCD to a wall using a cord or chain that can support the
weight of the monitor in order to prevent the monitor from
falling. Fasten the cord or chain to the monitor using the
provided clamp and screw.
500mm
Screw Holes
Clamp
Screw
Before attaching the LCD monitor to the wall, make sure
that the wall can support the weight of the monitor.
Be sure to remove the cord or chain from the wall before
moving the LCD.
Cord or chain
English-7
6. To prevent the main power switch from
being used
To attach main power switch cover: Insert the tab on the
switch cover into the slot on the display next to the main
power switch. Secure into place using 1 screw.
NOTE: With the main power switch cover in place, the
main power switch cannot be turned off. Remove
main power switch cover in order to switch off the
display.
See "Parts Name and Functions" on page 12.