Parts Name And Functions; Control Panel - NEC MultiSync LCD6520L User Manual

Hide thumbs Also See for MultiSync LCD6520L:
Table of Contents

Advertisement

Parts Name and Functions

Control Panel

1
POWER button ( )
Switches the power on/off. See also page 24.
2
MUTE button
Switches the audio mute ON/OFF.
3
INPUT button
Acts as SET button within OSD menu. (Toggle switches
between [DVI], [VGA], [RGB/HV], [HDMI], [DVD/HD],
[VIDEO], [S-VIDEO] or [TV]*). [S-VIDEO] is enabled by
selecting the "SEPARATE" mode in the OSD or by having
the "S-VIDEO" cable connected with the "S-VIDEO" signal
present and selecting "PRIORITY" MODE. See page 31.
4
PLUS (+) button
Acts as (+) button to increase the adjustment with OSD menu.
Increases the audio output level when the OSD menu is
turned off.
5
MINUS (-) button
Acts as (-) button to decrease the adjustment with OSD menu.
Decreases the audio output level when the OSD menu is
turned off.
6
UP ( ) button
Activates the OSD menu when the OSD menu is turned-off.
Acts as
button to move the highlighted area up to select
adjustment items within OSD menu.
7
DOWN ( ) button
Activates the OSD menu when the OSD menu is turned-off.
Acts as
button to move the highlighted area down to
select adjustment items within OSD menu.
8
EXIT button
Activates the OSD menu when the OSD menu is turned-off.
Acts as EXIT button within the OSD to move to previous
menu.
9
Remote control sensor and Power Indicator
Receives the signal from the remote control (when using the
wireless remote control). See also page 15.
Glows green when the LCD monitor is in active mode*.
Glows amber when the LCD is in POWER OFF (standby)
mode. Blinks amber when the monitor is in Power Save
Mode. Green and Amber blink alternately while in Power
Standby mode with the "SCHEDULE SETTINGS" function
enabled. When a component failure is detected within the
monitor, the indicator will blink red.
* If "OFF" is selected in "POWER INDICATOR" (see page 30),
LED will not light when the LCD monitor is in active mode.
Control Key Lock Mode
This control completely locks out access to all Control Key
functions. To activate the control key lock function, press both
and
and hold down simultaneously for more than
3 seconds. To resume user mode, press both
hold simultaneously for more than 3 seconds.
*: The product you purchased may not have this feature.
English-12
and
and

Advertisement

Table of Contents
loading

Table of Contents