Advertisement
Quick Links
Advertisement
Related Manuals for Total TGGLI2001
Summary of Contents for Total TGGLI2001
- Page 1 PRODUCT LITHIUM-ION MANUAL GLUE GUN TGGLI2001...
-
Page 2: General Safety
| English Original Instructions GENERAL SAFETY WARNINGS ⚠ Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool"... - Page 3 | English power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There increased risk of electric shock if your body earthed grounded.
- Page 4 | English doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools result in serious personal injury. personal protective equipment.
- Page 5 | English your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these connected properly used. Use of dust collection can reduce dust- related hazards.
- Page 6 | English instructions operate power tool. Power tools are dangerous in the hands of untrained users. Maintain power tools. Check for misalignment binding moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use.
- Page 7 | English THE SYMBOLS IN INSTRUCTION MANUAL Double insulated additional protection Read instruction manual before using. CE conformity. Safety alert. Please only use the accessories supported by the manufacturer. Wear safety glasses, hearing protection and dust mask. Waste electrical products should not be disposed with household waste.
-
Page 8: Safety Regulations
| English SAFETY REGULATIONS Warning! Do not open the casing! Dangerous voltage is found unprotected on some components inside the product’s casing; contact with these may lead to electric shock. product only repaired by qualified service personnel. The product may not be taken apart nor be changed. - Page 9 | English inflammable material. m) Do not hold the glue gun over the same spot for a long time. Do not use the glue gun in explosive environments. Keep in mind that heat can conduct to inflammable material that is out of sight. Place the glue gun on the holder after use and let it cool off before storage.
-
Page 10: Operation
| English OPERATION Installing /Removing Battery Pack Installing Battery Pack Remove Battery Pack Figure 2 Make sure the on/off switch is in the off(O) position. (Figure.1) Insert the battery pack into the product as shown. (Figure.2) Make sure the latches on the battery pack snap into place and that battery pack is secured in the product before beginning operation. - Page 11 | English position. Make sure the on/off switch is in the off(O) position. (Figure.1) Glue Stick Glue Stick Figure 4 Figure 5 Figure 6 Insert a glue stick through the opening at the back of the glue gun. Guide the glue stick into the glue chamber until it will go no further.
- Page 12 | English At this time, you should place a new one stick, so the new stick can push the former one, the glue gun will regularly. (Figure.6) Figure 7 Figure 8 Helpful hints for use Before applying glue to a surface or workplace.
- Page 13 | English object to which you have applied hot glue. Do not use your fingers to press down on an object to which hot glue has just been applied. This can cause hot glue to escape from the edges or heat up the bonding surface and possibly cause burns or damage to surrounding objects.
- Page 14 | English Holding the glue gun firmly, place the nozzle close to the surface where glue will be applied. Pull the trigger until glue flows from the nozzle. Do not over apply. Probl Cause Remedy The nozzle Clean coatin is blocked Clean materi ascending...
- Page 15 | English nozzle. Spray Coating Dilute material Turn coars has a too material high adjustment viscosity. screw to the much left (-). material Turn to the Material left adjustment Clean screw Replace turned too Tighten far to the container right (+). Nozzle dirty filter dirty...
- Page 16 | English mist(o coating screw to the verspr material left (-). applied...
- Page 17 TOTAL TOOLS WORLD MADE IN CHINA T0723.V03 TOTAL TOOLS CO., PTE. LTD. No. 45 Songbei Road, Suzhou Industrial Park, China.
Need help?
Do you have a question about the TGGLI2001 and is the answer not in the manual?
Questions and answers