Measuring The Vertical Skew Amount For The Frame Edge Mark And Calculating The Adjustment Amount - Epson L-4733A Operation Manual

L-4733A/L-4733AW Operation Guide
This completes this section.
Next, adjust the tilt for the skew rollers.
"Adjusting the tilt for the skew rollers" on page 176
U
Measuring the vertical skew amount for the frame edge mark and
calculating the adjustment amount
A
Set frame edge mark information in the Print Info. for a preset suitable to the type of substrate loaded.
Item
Print Frame Edge Mark
Frame Edge Mark Position
B
Print the print data with the created preset.
C
When printing is complete, hold down the Feed switch on the press until the substrate is fed and the frame
border is on the Rewinder's workbench.
D
Check the frame border on the Rewinder's workbench and measure the vertical skew amount (c) of the
frame edge marks.
E
Calculate the adjustment amount for the skew roller from the value (c) measured in step 4.
Skew roller adjustment value (mm) = c × 0.7
This completes this section.
Next, adjust the tilt for the skew rollers.
"Adjusting the tilt for the skew rollers" on page 176
U
Various Print Settings
Print
Set so that they do not overlap with the label design
175
Value