Removing Cd-Rw Software From Powermate 2000 Systems With Windows 2000; Nec Softdvd Player; Installing The Nec Softdvd Player - NEC CD-RW AND SOFTDVD SOFTWARE Using Instruction

Removing CD-RW Software from PowerMate 2000 Systems with
Windows 2000
If you have an NEC PowerMate
system and you want to remove the CD-RW software, be sure to remove
before you remove the
first. Then remove the DirectCD application. Removing DirectCD before Easy CD Creator
causes a loss in CD drive functionality.
If you happen to remove the CD-RW applications in the wrong order, go to the Microsoft
site and find their solutions in the Microsoft Knowledge Base article Q270008.

NEC SoftDVD Player

The following sections provide information on:
T

installing the NEC SoftDVD Player

T
starting and using the NEC SoftDVD Player
T
identifying conditions, situations, and settings that affect playback
T
using features such as displaying movies on a television set (if supported by your system)
T
uninstalling the SoftDVD Player.
Installing the NEC SoftDVD Player
Use the following procedure to install the SoftDVD Player.
Power on your NEC system (see your NEC user's guide for procedures).
1.
Insert the NEC SoftDVD Player CD in the DVD-ROM or combination drive.
2.
T
If auto-insert notification is enabled, the installation program launches automatically.
T
If auto-insert notification is not enabled, click
Run. Browse for the drive containing the NEC SoftDVD Player CD, and double click
Setup
The Welcome to the InstallShield for NEC SoftDVD Player window appears.
Click
3. Next
agreement. The Important Setup Information window appears. (If you click No, the
installation terminates.)
Read the Important Setup information and click
4.
The Setup Status window appears and driver installation begins. A status bar appears on the
window showing the progress of the installation.
5. At the Jet-Audio Player Setup welcome window, click
At the Choose Destination Location window, accept the default location or click Browse to
6.
choose your own destination. Click
At the Setup Type window, accept the default (Typical) or choose Compact or Custom and
7.
follow the prompts. Click
Using CD-RW and SoftDVD Software
6
®
2000 system running the Microsoft
DirectCD application.
If you need to remove the CD-RW software, remove Easy CD Creator
.
. The License Agreement window appears. Click
Next
.
Next
®
Windows 2000 operating
on the Windows desktop and select
Start
to accept the license
Yes
.
Next
Next .
.
Easy CD Creator
®
support