Displaying Movies On A Television Set; Optimizing Microsoft Windows 98 Second Edition; Uninstalling The Nec Softdvd Player - NEC CD-RW AND SOFTDVD SOFTWARE Using Instruction

Displaying Movies on a Television Set

Note
This section applies to systems that have a TV Out connector and support the
connection of a television set.
If you connect a television set to your system to watch a movie on it instead of on your system's
LCD screen, set TV Out to Primary in the Windows Display Properties window.
To configure the television set as the primary display, follow these steps:
Connect the video cable from your television to the TV Out connector on your system.
1.
Some systems require an optional TV Out cable adapter that plugs into the TV Out
connector on the system. Carefully align the pins on the cable adapter (arrow facing up)
with the connector before plugging it in. Connect your TV's video cable to the other end of
the adapter.
Right click the Windows desktop and click
2.
appears.
Click the Settings tab and click the Advanced button. Click the Displays tab.
3.
4. Select the Television display field. Click the Primary button. Click

Optimizing Microsoft Windows 98 Second Edition

For optimal performance of the NEC SoftDVD Player on NEC systems with the Microsoft
Windows 98 Second Edition operating system, check that the DVD-ROM drive DMA setting is
enabled.
1. On the Windows desktop, right click My Computer and click
2. At the System Properties window, click the Device Manager tab.
3. At the Device Manager window, double click the CD ROM icon and double click the
DVD-ROM drive icon.
Click the Settings tab. If there is no check mark in the DMA box, click on the box to enable
4.
the setting.
Click
5. OK

Uninstalling the NEC SoftDVD Player

If you ever need to uninstall the NEC SoftDVD Player from your system, proceed as follows.
On the Windows desktop, click
1.
Panel .
Double click
2.
3. Double click
In addition to uninstalling the NEC SoftDVD Player, you need to reset your Audio CD settings
from Jet-Audio Player to Windows CD Player.
For Windows 2000, change the settings as follows.
On the Windows desktop, double-click
1.
2. Click Tools
in the Settings window. Click
Start
Add/Remove Programs
Jet-Audio in the Add/Remove Programs window and follow the prompts.
, click Folder Options , and select
. The Display Properties window
Properties
Properties
in the System Properties window.
OK
, point to Settings and Control Panel, and click
.
.
My Computer
File Types tab.
Using CD-RW and SoftDVD Software 9
OK twice.
.
Control