Advertisement
Advertisement
Table of Contents
Related Manuals for Airstar SIROCCO 300 PROPACK
Summary of Contents for Airstar SIROCCO 300 PROPACK
- Page 1 SIROCCO 300 PROPACK User manual A-01571-A1 20/11/2024...
-
Page 2: Safety Instructions
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, EXCESSIVE EXPOSURE TO RADIATION OR INJURY: Ensure that the power is disconnected when setting up the light source (battery off and charger unplugged). Do not attempt to modify/repair your Sirocco independently: all repairs must be carried out exclusively by AIRSTAR authorised personnel. - Page 3 2. Safety precaution and prohibitions ■ Electrical misusage Use dedicated charger. Use or charge the battery only in the dedicated application. Don't charge the battery by an electric outlet directly or a cigarette lighter charger. Don't charge the battery reversely. ■...
- Page 4 3. Safety Handling Procedure for the Transporter ■ Quarantine : Packages that are crushed, punctured or torn open to reveal contents should not be transported. Such packages should be isolated until the shipper has been consulted, provided instructions and, if appropriate, arranged to have the product inspected and repacked.
- Page 5 INSTALLING A SIROCCO PROPACK WARNING To ensure the rain and dust protection category, do not subject the connection to any forces that may bend it (for example, do not attach loads to the cable, do not coil up unused cable, etc.). The power cord must be replaced in the event that any parts are broken or it is excessively worn.
- Page 6 LIGHTING CONTROL AND AIRSTAR LIGHT APP • Connecting the power cable restores previous animations or settings Except if: Light is at 0 % > light is restored at 10 % Animation is Pulse or Beacon and frequency is at 0 % > light and frequency are restored at 100 %...
- Page 7 AIRSTAR LIGHT APP: ⇒ Use the AIRSTAR LIGHT app to control the light intensity and the animations (flashing, revolving light). ⇒ PLEASE NOTE: CHANGE THE ADMIN AND USER PASSWORDS AND THE NETWORK NAME FOR SECURITY REASONS ⇒ Passwords for first connection ...
-
Page 8: Maintenance
MAINTENANCE LED MODULES ⇒ It is important to replace any damaged LED modules. ⇒ LED modules must be replaced in the AIRSTAR network - please contact your AIRSTAR retailer. ENVELOPE ⇒ A damaged envelope must be immediately repaired or replaced. -
Page 9: Cleaning The Air Filter
If the whole unit needs to be replaced, AIRSTAR must receive the original unit before shipping the replacement unit. AIRSTAR cannot be held responsible for any misuse of the equipment by the user. Any use of the envelope or the electrical equipment other than that which is specified in this manual, or any use of unauthorised tools or components, is not covered by this warranty, and remains the sole responsibility of the user. -
Page 10: Technical Characteristics
TECHNICAL CHARACTERISTICS Non-contractual information provided for information purposes only, and which may be subject to change without notice. Main parameters Units Sirocco 300 ProPack Voltage range 48-52 Overall performance lm/W Overall energy consumption Luminous flux 20,500 Number of LED modules... - Page 11 ZA Champ 7 Laux • 38190 Champ-Près-Froges • France Tel. +33 (0) 476 13 12 20 www.airstar-light.com A-01571-A1 20/11/2024...
Need help?
Do you have a question about the SIROCCO 300 PROPACK and is the answer not in the manual?
Questions and answers