2. Setup/foldback must be performed by qualified personnel. 3. Do not try to modify/repair your Sirocco by your own: all service must be performed by AIRSTAR authorized personnel only. 4. Always disconnect your product unit and wait for 15min cool down before servicing.
Page 3
SIROCCO PARTS LIST 1 Nut 2 Light Engine 3 Envelope 4 Power Supply Cord 5 Zipper 6 LED module 7 South Pole Plate 8 Stand (purchased separately) 9 Envelope repair Kit (2 sheets) 10 Carrying bag 11 Owner’s Manual *see details at right 18-07-2022 / A-00222-A...
Page 4
Maintain button pushed and plug. AIRSTAR LIGHT APP: ⇒ Use the mobile App AIRSTAR LIGHT to control the light output & light features (blink, beacon) ⇒ IMPORTANT: CHANGE ADMIN & USER PASSWORDS & NETWORK NAME FOR SECURITY REASONS ⇒ First connection passwords ...
Page 5
Make sure there is sufficient space in the installation area to allow the balloon to be inflated and to prevent the product from tipping over when inflating. NOTE: • Always use AIRSTAR-approved stands designed to work with your Sirocco unit. • Always securely tighten all T-Handles to avoid injury. •...
LED MODULE ⇒ It is important to replace any damaged led module. ⇒ The replacement of a led module has to be done in the AIRSTAR network, please contact your AIRSTAR reseller. ENVELOPE ⇒ A damaged envelope must immediately be repaired or replaced.
WARRANTY At AIRSTAR, we are very proud of our quality control and the reliability of our Sirocco product line. We also understand that there will occasionally be issues that need to be covered under warranty, so we offer the following coverage: •...