Related Manuals for Airstar SIROCCO 300
Summary of Contents for Airstar SIROCCO 300
- Page 1 SIROCCO 300 – 400 - 500 – 700 – 1000 – 1300 User manual Set-up video A-00222-A4 23/07/2024...
-
Page 2: Safety Instructions
Ensure that the power is disconnected when setting up the light source. The light source must be installed by qualified personnel. Do not attempt to modify/repair your Sirocco independently: all repairs must be carried out exclusively by AIRSTAR authorised personnel. -
Page 3: Parts List
PARTS LIST 1 Nut 2 Light source 3 Envelope 4 Power cable 5 Zip 6 LED Module 7 Base terminal 8 Stand (optional) 9 Envelope repair kit (2 sheets) 10 Transport bag 11 User manual 12 Battery power cable (PowerSwitch option) *see detail in right-hand diagram A-00222-A4 23/07/2024... - Page 4 Hold the button down and connect. AIRSTAR LIGHT APP: ⇒ Use the AIRSTAR LIGHT app to control the light intensity and the animations (flashing, revolving light). ⇒ PLEASE NOTE: CHANGE THE ADMIN AND USER PASSWORDS AND THE NETWORK NAME FOR SECURITY REASONS ⇒...
- Page 5 The stands are EXCLUSIVELY designed for vertical mounting of Sirocco products. The use of any other fastening system that is not approved by Airstar will void your warranty, and you will be held liable in the event of a fall or accident.
- Page 6 P460-AC / P480-S The ballast bags are compulsory on stands, whether they are used inside or outside. Airstar ballast bags (recommended) or other brands must contain a minimum of 12 kg/25 lb with your choice of material (sand, steel balls, etc.).
- Page 7 Fig. 3 P500TA The ballast bags are compulsory on stands, whether they are used inside or outside. Airstar ballast bags (recommended) or other brands must contain a minimum of 12 kg/25 lb with your choice of material (sand, steel balls, etc.).
-
Page 8: Maintenance
MAINTENANCE LED MODULES ⇒ It is important to replace any damaged LED modules. ⇒ LED modules must be replaced in the AIRSTAR network - please contact your AIRSTAR retailer. ENVELOPE ⇒ A damaged envelope must be immediately repaired or replaced. -
Page 9: Warranty
The AIRSTAR technicians will decide whether your breakdown is covered by the warranty. After your Sirocco is repaired, AIRSTAR will send it back to you, by land, at its own expense. (Express shipping is available for an additional charge). -
Page 10: Precautions For Use
POWERSWITCH OPTION THIS OPTION IS ONLY AVAILABLE FOR THE SIROCCO 300 AND 500 The PowerSwitch option lets you connect your Sirocco 300 or 500 to an external battery. USING THE POWERSWITCH OPTION Airstar Energy Pack Power Cable Sirocco Service Stage •... - Page 11 Airstar can supply a cable without an XLR connector to connect your battery. Caution: In this case, the purchaser is solely responsible for plug assembly, and Airstar cannot be held responsible for incorrect connections made by the purchaser. Use of a cable without an XLR connector automatically voids the warranty on the PowerSwitch electronic board, part no.
- Page 12 ZA Champ 7 Laux • 38190 Champ-Près-Froges • France Tel. +33 (0) 476 13 12 20 www.airstar-light.com A-00222-A4 23/07/2024...
Need help?
Do you have a question about the SIROCCO 300 and is the answer not in the manual?
Questions and answers