TP-Link VX230V Quick Start Manual

4. Connecting your devices
Wait until the Power, Internet and Wi-Fi lights change from
orange to green. Once the lights change to green, your
Modem-Router is pre-configured for use and the set up
process is complete!
Connecting to:
Wi-Fi:
To connect to Wi-Fi, please find your Wi-Fi Signal
Name (SSID), and password on the underside of your
Modem-Router.
LAN:
If a LAN (Wired) Connection is preferred, connect your
devices with your own Ethernet Cable to any of the
LAN 1-3 ports on the Modem-Router.
5. Changing your Wi-Fi and Admin Password
If you would like to change the default Wi-Fi Network Name
(SSID) and password for connecting to your Wi-Fi, you can
login to the TP-Link Web interface and change these settings.
Begin by connecting your device to the Modem-Router either
via Wi-Fi or using a LAN cable.
Open a web browser and enter '192.168.1.1' into the address
bar. This will take you to the TP-Link Graphical User Interface
(GUI) page. If this is your first time accessing the page, you'll be
prompted to set up an admin password for security purposes.
Once you've logged in with your admin credentials, navigate
to the Wireless section found under 'Basic' and then 'Wireless'
on the left-hand menu of the webpage. Here, you can update
your Wi-Fi network's name and password to your preferences.
Remember to save your changes. After updating, you'll need
to reconnect to the Wi-Fi network using the new credentials
you've just set up. If you encounter any issues or have further
questions, don't hesitate to reach out for assistance."
Need help?
Please visit the help section of our website.
pulseenergy.co.nz/help
greypowerelectricity.co.nz/help
blackboxpower.co.nz/help
Modem-Router
Quick Start
Guide
Follow these instructions to set up your new
unlimited broadband connection.
This is what has been included in your Modem-Router pack.
TP-Link VX230v
Wi-Fi Modem-Router
Ethernet Cable
DSL Cable
Power Adapter
Documentation