1. Manuals
  2. Brands
  3. Nedo Manuals
  4. Laser Level
  5. X-Liner 5.2
  6. Operating instructions manual

Nedo X-LINER 5.2 Operating Instructions Manual

Hide thumbs Also See for X-LINER 5.2:
1
2
3
4
5
6
7

Advertisement

Table of Contents

Operating Instructions
NEDO
GmbH & Co. KG
Hochgerichtstraße 39-43
D-72280 Dornstetten
Tel.: +49 7443 2401 0
Fax: +49 7443 2401 45
www.nedo.com
info@nedo.com
062141
08.08.2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the X-LINER 5.2 and is the answer not in the manual?

Questions and answers

Related Manuals for Nedo X-LINER 5.2

Summary of Contents for Nedo X-LINER 5.2

  • Page 1 Operating Instructions NEDO GmbH & Co. KG Hochgerichtstraße 39-43 D-72280 Dornstetten Tel.: +49 7443 2401 0 Fax: +49 7443 2401 45 www.nedo.com info@nedo.com 062141 08.08.2018...

  • Page 2: General Information

    Laser exit openings Never remove the warning signs on the unit. 1.2 Proper use The X-Liner 5.2 is suitable for marking heights, for aligning, plumbing, levelling and for carrying out similar work. The unit is designed for indoor use. Repair Repairs may only be carried out by NEDO or an authorised customer service agent.

  • Page 3: Scope Of Supply

    6. Operating Instructions 3 Technical Features 3.1 How it works On the one side the X-Liner 5.2 projects a horizontal (H) and a vertical (V) laser line, which cross in front of the unit. On the other side the X-Liner 5.2 projects 3 laser dots horizontally (HP –...
  • Page 4 The self-levelling is disabled, the LED (1) on the keypad lights up if the laser beam is switched on. Position 2 The pendulum locking device is unlocked. The self-levelling is enabled, the LED (1) on the keypad does not light up. Operating Instructions X-Liner 5.2...

  • Page 5: Power Supply

    Switches the laser to PULS mode for use of a laser receiver. 5 Power Supply When starting up the X-Liner 5.2 for the first time, install the batteries (3) supplied, as shown in the battery compartment. Insert /replace batteries The X-Liner 5.2 requires 3 batteries, 1.5 V (AA).

  • Page 6: Operation

    2 and switch on the unit with the ON/OFF button. If the laser lines flash, the X-Liner 5.2 is outside the self-levelling range. • If you have finished working with the unit, lock the pendulum locking device and use the ON/OFF button (press for 3 secs.) to switch off the unit.

  • Page 7: Troubleshooting

    X-Liner 5.2 must be checked by an authorised customer service or by NEDO. 9 Troubleshooting Note: If the errors cannot be rectified using one of the listed remedies, the X-Liner 5.2 must be examined by an authorised customer service agent or by NEDO. Error Cause...

This manual is also suitable for:

460 872

Table of Contents