Related Manuals for Nedo X-Liner 2
Summary of Contents for Nedo X-Liner 2
- Page 1 Operating Instructions NEDO GmbH & Co. KG Hochgerichtstraße 39-43 D-72280 Dornstetten Tel.: +49 7443 2401 0 Fax: +49 7443 2401 45 www.nedo.com info@nedo.com 062137 01.08.2018...
- Page 2 Laser exit openings Never remove the warning signs on the unit. 1.2 Proper use The X-Liner 2 is suitable for marking heights, for aligning, plumbing, levelling and for carrying out similar work. The unit is designed for indoor use. Repair Repairs may only be carried out by NEDO or an authorised customer service agent.
- Page 3 8. Laser target board 3 Technical Features 3.1 How it works The X-Liner 2 projects a horizontal (H) and a vertical (V) laser line, which cross in front of the unit. The X-Liner 2 is equipped with a pendulum for self-levelling and levels out tilted positioning of the unit by up to 4°...
- Page 4 "RED" : Unit switch in position 1. "GREEN": Unit switch in position 2. If the battery charge is weak the LED display (4) above the ON/OFF button (3) begins to flash. If the batteries are too weak the laser switches off. Operating Instructions X-Liner 2...
- Page 5 5 Power Supply When starting up the X-Liner 2 for the first time, install the three batteries supplied, as shown in the battery compartment. Insert /replace batteries The X-Liner 2 requires 3 batteries, 1.5 V (AA). • Turn the battery compartment cover in the direction of the arrow •...
- Page 6 The accuracy of the laser beam should be checked regularly. This requires a free measuring length of 10 m. The check is carried out in two steps. Step 1 • Position the X-Liner 2 as shown in the figure to the right. • Switch on the horizontal beam at the X-Liner 2.
- Page 7 X-Liner 2 must be checked by an authorised customer service or by NEDO. 9 Troubleshooting Note: If the errors cannot be rectified using one of the listed remedies, the X-Liner 2 must be examined by an authorised customer service agent or by NEDO. Error Cause...
Need help?
Do you have a question about the X-Liner 2 and is the answer not in the manual?
Questions and answers