Related Manuals for TREX Gorilla Lift XL360 II Series
Summary of Contents for TREX Gorilla Lift XL360 II Series
- Page 1 Gorilla Lift - XL360 Series II User Manual [Revision 2.0 September 2016] RETAIN THIS MANUAL FOR FUTURE REFERENCE PLEASE READ THIS MANUAL CAREFULLY BEFORE USE...
- Page 2 Gorilla Lift XL360 Series II Safety If used correctly, the XL360 is a powerful, high performance machine. If used improperly or without due precaution, it may represent a hazard. For safe operation, always comply strictly with the safety rules that follow, as well as those found throughout this manual. •...
- Page 3 Gorilla Lift XL360 Series II • Properly seat sling, chain, shackle etc in hook and fully close the hook safety clasp. Do not allow the hook hitch to support any part of the load. Do not apply loads over the point of the hook. •...
-
Page 4: Table Of Contents
Gorilla Lift XL360 Series II Table of Contents Components ............................5 Mounting and Assembly ........................6 Wiring .............................. 7 Operation ............................8 Using the Crane ..........................8 Pulley Configuration ........................9 Maintenance ............................. 10 Inspection, Lubrication and Cleaning ..................... 10 Specifications ........................... -
Page 5: Components
Gorilla Lift XL360 Series II Components Figure 1 No. Description Qty. Description Qty. Base Post M18 Flat Washer Boom Tube Boom Pin Boom R-Pin Electric Winch Boom Extension Pin M8 Flat Washer Secondary Pulley/Hook M8x20 Socket Button Head Screw Boom Rotation Handle M8 Lock Washer Handle Cover Boom Extension... -
Page 6: Mounting And Assembly
Gorilla Lift XL360 Series II Mounting and Assembly • The crane must be mounted to a suitable plate, frame or solid concrete floor before use. Verify that the mounting surface has no hidden components or brake lines before drilling or fastening. •... -
Page 7: Wiring
Gorilla Lift XL360 Series II Wiring 1. Connect the overload protector (23) onto the positive + (RED) winch motor terminal and secure using the supplied washers and nut on the winch motor terminal. 9. Connect the winch motor harness negative - BLACK wire to the negative - winch motor terminal and secure using the supplied washers and nut on the winch motor terminal. -
Page 8: Operation
Gorilla Lift XL360 Series II Operation WARNING! Never lift loads that exceed 500kg in single pulley configuration or 800kg in double pulley configuration. • Always keep pulleys well-greased. • Lubricate the cable if the crane is being used for the first time. NOTE: The cable should not be extended beyond the red warning line. -
Page 9: Pulley Configuration
Gorilla Lift XL360 Series II Pulley Configuration WARNING! Never lift loads that exceed 500kg in single pulley configuration or 800kg in double pulley configuration. The crane provides two pulley configurations as shown in Figure 4. The double pulley configuration allows greater weights to be lifted by effectively gearing down the winch. In other words the lift distance per rotation of the winch motor is reduced. -
Page 10: Maintenance
Gorilla Lift XL360 Series II Maintenance WARNING! Procedures not specifically explained in this manual must be performed by qualified technicians only. Inspection, Lubrication and Cleaning NOTE: If the crane will be exposed to wet conditions or corrosive environments, more frequent maintenance may be necessary to prevent corrosion. -
Page 11: Specifications
Gorilla Lift XL360 Series II Specifications Winch Motor Type 12VDC 90A. Maximum Load 500kg single pulley / 800kg double pulley Maximum Lift Height (base to 1940mm hook) Maximum Reach (from center 1490mm of rotation) Rotation 360° manual operation Weight 60kg approximately. Winch Cable 4.8 to 5.4mm diameter. - Page 12 Some experts believe the incorrect or prolonged use of almost any product could cause serious injury or death. For information that may reduce your risk of serious injury or death, consult the points below and additionally, the information available at www.datastreamserver.com/safety •...
Need help?
Do you have a question about the Gorilla Lift XL360 II Series and is the answer not in the manual?
Questions and answers