Advertisement
Quick Links
Advertisement
Related Manuals for GigRig G2 SOFTWARE
Summary of Contents for GigRig G2 SOFTWARE
- Page 1 G2 SOFTWARE UPGRADE INSTALLATION MANUAL TheGigRig Ltd G2 Software Upgrade Manual, February 2025...
- Page 2 CONTENTS 1. Instructions 2. Warranty TheGigRig Ltd G2 Software Upgrade Manual, February 2025...
- Page 3 Installing your new G2 software chip: Step 1 - Remove the screws indicated with the green arrows. Note the top row of screws on the front panel DO NOT need to be removed. TheGigRig Ltd G2 Software Upgrade Manual, February 2025...
- Page 4 Step 2 - Lift the front and top panel up and place at the rear of the unit. Step 3 - Locate the software chip on the motherboard. Step 4 - Lever out the chip gently with a pair of tweezers. TheGigRig Ltd G2 Software Upgrade Manual, February 2025...
- Page 5 Step 7 – Follow steps 3 to 6 to update the Midi chip in the same way. The midi chip is located on the Motherboard to the left of where the foot switch cables are connected. TheGigRig Ltd G2 Software Upgrade Manual, February 2025...
- Page 6 Step 8 - Replace all screws, then power up whilst holding down footswitch 2. Now press and hold footswitch 3 for 2 seconds. This will fully ‘factory re-set’ G2. Your software upgrade is now complete and your G2 is ready to be programmed. TheGigRig Ltd G2 Software Upgrade Manual, February 2025...
-
Page 7: Warranty
In no event will The GigRig be liable for more than the amount of the purchase price, not to exceed the current retail price of the product. The GigRig disclaims any other warranties, express or implied. By using the product, the user accepts all terms herein.
Need help?
Do you have a question about the G2 SOFTWARE and is the answer not in the manual?
Questions and answers