Chapter 3 Utility; System Requirements; Installation - SMC Networks HPAV-ETH Manual

Chapter 3. Utility
This Windows utility enables users to find the SMCHPAV-ETH on the Powerline network,
measures data transfer rates, ensures privacy and performs diagnostics.

3.1 System Requirements

Operation System
CPU
RAM
Free Disk Space
Network Interface

3.2 Installation

Step1. Before installing this utility, please verify that there is no any other Powerline
utility installed on your computer. If there is another utility installed, please
uninstall it and restart your computer before installing the SMCHPAV-ETH utility.
Step 2. Please insert the SMCHPAV-ETH CD-ROM into your computer's CD-ROM
drive. Go to the SMCHPAV-ETH directory and double-click Setup.exe to start
the installation. Then the following screens will appear (See Figure 1).
Step 3. Follow the steps to install this utility by clicking Next >. No password or CD-key
is required for installation.
Microsoft Windows® 2000, XP, Vista
Intel Pentium III or better, clock rate faster than 2.0GHz
recommended
Minimum 128MB
Minimum 20MB
One Fast Ethernet (10/100Mbps) network card with RJ45 port, one
RJ45 Ethernet cable
Figure 1.Installation Browser Snapshot
11