Toshiba e-STUDIO2528A Manual page 217

Sub- Applicable
Code Element Sub element
code Models
3634 - All System General
3635 - All System User interface
3637 - All System Network
3638 - All System Network
3639 - All System Network
3640 - All System Network
3641 - All System Network
3642 0 All System Print/NW Fax/
IP Fax/Internet
Fax
3642 2 All System DPWS Scan
3642 3 All System Print/NW Fax/
IP Fax/Internet
Fax
3642 4 All System Print/NW Fax/
IP Fax/Internet
Fax
e-STUDIO2528A/3028A/3528A/4528A/5528A/6528A (Ver00)
08 SETTING MODE
Item Sub item
License control Intermediate server URL
setting
Trial copy function
Internet Fax Addition of transmission
header
Internet Fax Addition of receiving
record
Internet Fax Adding method of
transmission header
MDS Authentication Authentication of MDS
system
MDS Authentication Display in TopAccess
User authentication Authentication method
setting
Job authentication/
Permission check/Quota
check
User authentication Remote Scan
setting
User authentication Client application
setting
Details Contents
Sets the URL for a server which is built between a
license server and an MFP
Maximum 256 letters
<Default value>
https://lic.toshiba-solutions.com/services/
0: Disabled
1: Enabled
0: Disabled
1: Enabled
0: Disabled
1: Enabled
1: Overwriting inside the image (5 mm from the top)
2: Adding outside the image (5 mm from the top)
0: Disabled (Normal mode)
1: Enabled (MDS authentication mode)
2: Enabled (Cloud base MDS authentication mode)
* If the EWB license has not been installed at
startup, the value of this code becomes "0" if "1" has
been set.
* When the value of this code has been changed
from "0" to "1" or "2", that for 08-3641 becomes "1"
accordingly.
* In order to enable this setting, specify the following
functions.
[Enable Port] or [Enable SSL/TLS Port](08-9819) in
ODCA Setting -> Enable(1)
[Department Code](08-3669) -> Disable(0)
[User Authentication](08-9264) -> Enable(1)
[User Authentication According to Function](08-
8630) -> Disable(0)
[Authentication Type](08-9293) -> MFP Local
Authentication(0)
[Auto Change Login User](08-8758) in Card
Authentication Setting -> Disable(0)
Sets whether the information of MDS Authentication
will be displayed or not in TopAccess and control
panel.
0: Non display
1: Display
* When "1" or "2" has been set for 08-3640, the
value of this code becomes "1" accordingly, and
cannot be changed to "0".
0: Authentication with a user name and domain
name (current method)
1: No authentication control in the equipment
2: Authentication with a user name only
3: Authentication with domain participation
information only
4: Authentication with an external application
* "0" is set in the high security mode.
0: Performs job authentication, permission check
and Quota check.
1: Does not perform job authentication, permission
check and Quota check.
4: Authentication with an external application
* "0" is set in the high security mode.
0: Normal authentication
4: Authentication with an external application
* "0" is set in the high security mode.
0: Normal authentication
4: Authentication with an external application
* "0" is set in the high security mode.
5 - 61
Default Acceptable Save Proce Service
value value location dure UI
Refer to Refer to H/S 11
contents contents
1 0~1 SYS 1
0 0~1 SYS 1 Yes
0 0~1 SYS 1 Yes
1 1~2 SYS 1 Yes
0 0~2 SYS 1
0 0~1 SYS 1
0 0~4 SYS 4
0 0, 1, 4 SYS 4
0 0, 4 SYS 4
0 0, 4 SYS 4
© 2021, 2022 Toshiba Tec Corporation All rights reserved
Keeping
Cloning Backup
value
Def Yes S
Def Yes H
Def Yes H
Def Yes H
Def Yes H
Def Yes H
Def Yes H
Def Yes H
Def Yes H
Def Yes H
Def Yes H