Thanks to the product you have purchased and by following the suggestions in this manual, you will benefit from optimal environmental conditions with the lowest possible energy investment. Panasonic Corporation Compliance This unit complies with European directives: •...
1. General information 1. GENERALINFORMATION 1.1 About the manual This manual was written to provide all the explanations for a Capital letters indicate a combination of components the correct management of the appliance. and dimensions. This instruction manual is an integral part of the appli- The white numbers in black marks indicate a se- ance and must therefore be kept in a safe place and ries of actions to be carried out in sequence.
1. General information Productpresentation it contains the menu structure of the control panel, oper- it addresses all recipients. ational parameters, input and output states, alarms, and it contains information to identify the product, its compo- installer parameters. nents, compatible accessories, and its intended use. Functions Usage it is addressed solely and exclusively to the installer and it is addressed solely and exclusively to the User. the technical assistance Center. it contains all the necessary information for the user to op- it contains sections dedicated to different types of units erate the device.
2. Control panel - interfaCe 2. CONTROLPANEL-INTERFACE 2.1 Interface Description The electronic control panel with a touch interface for wall installation allows: • adjustment of the room temperature • management of the main functions of the device • temperature measurement • adjustment of the fan speed features: •...
4. Control panel - operation 4. CONTROLPANEL-OPERATION 4.1 Basic menu Unit status Disabled Date and time Detected temperature Disabled fan speed Remote OFF 00 : 00 dd/mm/yyyy 20.0 °C Status and alarms shown on the display. if there is a remote device for turning the unit on/off (switch or timer), the use of the control panel will only ...
4. Control panel - operation Fan speed selection Toselectthedesiredtemperature ► hold down the button Tochangethetemperaturesetpoint ► hold down the button ► operate the buttons to decrease or FAN SPEED increase the desired value the value shown on the display changes Toconfirm ► hold down the button Alarm display and reset Toselectthedesiredfanspeed ALARMS...
4. Control panel - operation 4.2 Advanced menu User functions Service functions installer functions Temperatures Season Touch Parameters Time slots Help guide Trend Installer Toaccesstheadvancedmenu Ventilation only ► hold down the button Summer integration Toreturntothebasicmenu Winter integration ► hold down the button User functions Temperatures TEMPERATURE DISPLAY Toaccessthetemperatureandstatusmenu Room return probe...
Page 10
4. Control panel - operation Date / Time / Time slots TEMPERATURE DISPLAY STATUSES 13.50 % 13.50 % 13.50 % DISABLE TIME SLOTS fan status in % external unit status in % motorized nozzle status in % Defrost status of the outdoor unit Date / time / time slots Time band status Start Time slot type To return to the main menu...
Page 11
4. Control panel - operation Toaccesstheclockmenu Summer operation ► hold down the button Winter operation To set the desired value in the standard unit, automatic operation is provided. ► select the value if the seasonal change is expected from an external digital input, it won't be possible to change the season To enable editing via the command.
Page 12
4. Control panel - operation ALARM HISTORY No alarms TOUCH AND SOFTWARE CONFIGURATION XXXXXX 001 Date and time Configuration alarm ACF1 XXXX Monday Month XXXX Hour XXXX XXXXXX 002 Year XXXX Minutes XXXX Configuration alarm ACF1 Save Toaccessthetouchmenuandsoftware Toaccessthetrendmenu ► hold down the button ►...
Page 16
Panasonic Corporation 1006 Kadoma, Kadoma City, Osaka, Japan...
Need help?
Do you have a question about the Jet Air Stream P-VTVF Series and is the answer not in the manual?
Questions and answers