Download Print this page

Safavieh Furniture Conall NST3102 Manual

1 drawer nightstand

Advertisement

Quick Links

NOTICE
*Please make sure that you have all part indicated and they are in good condition before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a soft surface to prevent scratching the finish during
assembly.
*This item may require periodic tightening.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email customersupport@safavieh.com
PREPARATION
*Before beginning assembly of product, make sure all part are present. Compare part with
part contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 45 minutes.
*Tools Required for Assembly (Not included): Screwdriver
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the lacquer.
Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and avoid
common hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be done
with a soft lint free cotton cloth dampened with water or furniture polish. On highly used surfaces
we recommend applying a quality paste wax which should be used on a reguler basis to provide
additional protection from scratches and spills. How often you apply the wax depends on how
much wear the furniture receives.
Part List
16
13
12
15
14
6
5
2
3
8
11
10
9
9
1
4
7
Model# NST3102
Product Dimensions: W 22.83" X D 15.67" X H 21.85"
WARNING :
WEIGHT CAPACITY :
Top : 26 Lbs
Drawer : 11 Lbs
Shelf : 15 Lbs
Warning : Do not stand on the product.
Warning : Do not over torque bolts.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Conall NST3102 and is the answer not in the manual?

Questions and answers

Summary of Contents for Safavieh Furniture Conall NST3102

  • Page 1 NOTICE *Please make sure that you have all part indicated and they are in good condition before you begin assembly of this item. Refer to part list and hardware list below for guidance. *This item should be assembled on a soft surface to prevent scratching the finish during assembly.
  • Page 2: Hardware List

    Hardware List Ax28 Bx28 Cx25 Ø6x32 mm Ø15x12 mm Ø8x32 mm Ø7x32 mm Ø4x19 mm ASx1 CPx1 CQx2 AYx4 Sx12 Ø5x8.5 mm Ø4x10 mm Ø20 mm 310 mm list "H" 547 mm...
  • Page 3 Part List & HW Piece Description Carton Call Piece Description Carton Call Right Side Panel 1 of 1 Cambolt 1 of 1 1 of 1 Camlock Left Side Panel 1 of 1 Bottom Panel Wooden Dowel 1 of 1 1 of 1 Bottom Support 1 of 1 Screw M 7 x 32 mm...
  • Page 4 PREPARATION Before beginning assembly of product, make sure all part are present. Compare part with part contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 45 minutes. STEP2: Combine Side Drawers (11 &...
  • Page 5 FRONT 1 2 3 BACK 1 2 3 STEP5: Insert Cambolt (A) into right side panel (1).Insert Wooden Dowel (C) into right side Panel (1). STEP6: Attach Bottom panel (3), front fixed shelf (5) and top support (6) Install the mini slide runner (AS) into position as shown in picture. into Right side panel (1).
  • Page 6 STEP10: Insert Right pillar (7), Left pillar (8) Secure with Camlock (B) and STEP9: Insert Cambolt (A) into right pillar (7) and left pillar (8) tighten it using screwdriver. STEP11: Insert Back panel 2x (9), And List "H" (CP) STEP12: Insert Cambolt (A) into top panel (10)
  • Page 7 STEP13: STEP14: Attach the plastic stopper (O) to the back panel Secure Insert top panel (10), Secure with Camlock (B) and with screw M4x19 mm (H) and tighten it using screwdriver. tighten it using screwdriver. STEP15: Insert the assembled drawer, Secure with Bolt M4x10 mm (CQ) and tighten it using screwdriver.

This manual is also suitable for:

Conall nst3102a