Safavieh Furniture Ophelia NST9603 Quick Start Manual

Safavieh Furniture Ophelia NST9603 Quick Start Manual

Advertisement

Quick Links

NOTICE

*Please make sure that you have all parts indicated and they are in good condi�on before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a so� surface to prevent scratching the finish during
assembly.
*This item may require periodic �ghtening.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email customersupport@safavieh.com

PREPARATION

*Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
*If any part is missing or damaged, do not a�empt to assemble the product.
*Es�mated Assembly Time: 45 minutes.
*Tools Required for Assembly (included): Allen Key

CARE AND MAINTENANCE

Always use felt pads under all ar�cles to prevent discolorra�on or so�tening of the lacquer.
Plas�c and rubber bases on items can discolor wood. Wipe up spills immediately and avoid
common hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be done
with a so� lint free co�on cloth dampened with water or furniture polish. On highly used surfaces
we recommend applying a quality paste wax shich should be used on a reguler basis to provide
addi�onal protec�on from scratches and spills. How o�en you apply the wax depends on how
much wear the furniture receives.

Part List

E
A
F
C
D
B
LC15A2
LC15A2
Model# NST9603
Product Dimensions: 15"Wx15"Dx21"H
WARNING :
WEIGHT CAPACITY:
19 LBS.
SHELF LOAD CAPACITY : 19.8 LBS.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ophelia NST9603 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Safavieh Furniture Ophelia NST9603

  • Page 1 NOTICE *Please make sure that you have all parts indicated and they are in good condi�on before you begin assembly of this item. Refer to part list and hardware list below for guidance. *This item should be assembled on a so� surface to prevent scratching the finish during assembly.
  • Page 2 Hardware List HW1x4 HW2x4 HW3x4 HW4x8 HW5x4 HW6x1 Ø 8 x 30 mm Ø 6 x 35 mm Ø 15 mm M 7 x 50 mm HW7x28 HW8x1 HW9x1 HW10x4 HW11x4 HW PM2x4 M 4.5 x 12.5 mm M 4 x 25 mm M 3.5 x 15.5 mm HW HS26Ax2...
  • Page 3 Part List & HW For Mul�-Box Items Piece Descrip�on Carton Call Piece Descrip�on Carton Call Top Board 1 of 1 Cambolt 1 of 1 1 of 1 1 of 1 Bo�om Board CamLock Side Board Le� 1 of 1 1 of 1 Screw Cap Side Board Right 1 of 1...
  • Page 4 PREPARATION part contents list and hardware contents list. If any part is missing or damaged, do not a�empt to assemble the product. Es�mated Assembly Time: 45 minutes. STEP1: Insert Cambolt (HW1)into Top Board (A). STEP2: A�ach Side Board Le� (C) and Side Board Right (D), Insert Dowel (HW4) into Side Board Le�...
  • Page 5 LC15A2 LC15A2 HS26A STEP6: Insert Hinge (HW HS26A) into pre-hole in Wooden Door (E). Secure with Screw M4.5 x12.5 mm (HW7). STEP5: Insert Leg (LC15A2) into Moun�ng Plate, �ghten by rota�ng . the leg clockwise. STEP8: Use Wedge (HW11), Screw M 3.5 x15.5 (HW10) to �ghten the back of night stand by using screwdriver.
  • Page 6 STEP9: Assembly is complete.
  • Page 7 TIPPING RESTRAINTS KIT INSTALLATION GUIDANCE TIPPING RESTRAINTS KIT INSTALLATION GUIDANCE Different wall materials require unique wall fasteners. Different wall materials require unique wall fasteners. The wall plugs (AA2) and screws (AA3) are designed for fixi The wall plugs (AA2) and screws (AA3) are designed for fixing to concrete walls only. g to concrete walls only.
  • Page 8 HOW TO ADJUST HINGES To adjust the ver�cal height. Loosen the four screws “A” on both hinges. Two of them are usually in slo�ed holes which allows you to adjust up or down by few mm. Then �ghten back up. To adjust depth.

This manual is also suitable for:

Ophelia nst9603a

Table of Contents