Table of Contents
Advertisement
Parameter
ADSL Operation Mode (WAN)
ISP
Protocol
VPI/VCI
AAL5 Encapsulation Shows the packet encapsulation type. If you are unsure
Network Layer Parameters (WAN)
IP Address
Subnet Mask
Default Gateway
DNS Server
ISP Parameters
Username
Password
If the parameters are correct, click FINISH to save these settings.
Your Barricade is now set up. Go to "Troubleshooting" on page A-1 if you
cannot make a connection to the Internet.
Description
The name of the ISP you have selected from list.
The WAN protocol of your ISP. If you are unsure if the
selected protocol is correct check with your ISP.
Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI). If you are unsure the VPI/VCI values are correct
check with your ISP.
the selected Encapsulation is correct check with your ISP.
Go to page 4-21 for a detailed description.
WAN IP address (only displayed if you have static IP).
WAN subnet mask (only displayed if you have static IP).
WAN gateway (only displayed if you have static IP).
The IP address of the DNS server. If the DNS address
field was left blank in previous steps the address will be
displayed as 0.0.0.0.
The ISP assigned user name.
The password (hidden).
4-16
C
ONFIGURING THE
B
ARRICADE
Advertisement
Table of Contents
