Advertisement
Quick Links
CLIQ
®
Wall Programming Device
Quick Guide
D001305997 – Version 5
Product overview
Progress bar
The device is ready to use when
the middle LED is lit, solid white.
The three LEDs on top act as a
progress bar during the different
operations.
Fail
The operation failed. It is also
indicated with two decreasing
beeps.
Buzzer
Audible feedback when operation
is finished
Ethernet/PoE:
10BASE-Te &
100BASE-TX and PoE IEEE 802.3
at Class 1 (max. 3W)
RJ45: Ethernet CAT cable
Free Output:
Switch an external
device on/off
Free Output In: Conductor of
highest potential
Free Output Out: Conductor of
lowest potential
Success
The operation was successful. It is
also indicated by two increasing
beeps.
Key battery
Battery level is critically low and
key functionality is reduced.
Replace key battery as soon as
possible.
USB Type-C:
Support for PC connection
and USB flash memory
USB connector: Connect USB device
Keyway
DC Power Input:
12-24V (max. 3W)
VDC + : Positive potential
VDC – : Reference potential
RS485:
Differential communication
for future development of Line
interface over long cables and
external keypad
RS485 + : Interconnect cable A
RS485 – : Interconnect cable B
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Assa Abloy CLIQ Wall Programming Device
Summary of Contents for Assa Abloy CLIQ Wall Programming Device
- Page 1 CLIQ ® Wall Programming Device Quick Guide D001305997 – Version 5 Product overview Success Progress bar The operation was successful. It is The device is ready to use when also indicated by two increasing the middle LED is lit, solid white. beeps.
- Page 2 1. Configuration/restart The following indications are displayed during configuration or restart, for example if the device has lost connection (last heartbeat missed). Left LED flashes when the device is checking 802.1x settings. This step is skipped if 802.1x is not used. [blue, pulse] Middle LED flashes when the device is getting IP.
- Page 3 2. Key update The key must be inserted into the keyway and left there until you hear a beep. Do not turn the key! The three top LEDs act as a progress bar during the key update. The LEDs will have a continuous flashing pattern until the operation is complete. [white, pulse] Operation successful.
- Page 4 The LEDs will have a continuous flashing pattern until the operation is complete. [blue, blink] Operation successful. This is also indicated by two increasing beeps. Operation failed. This is also indicated by two decreasing beeps. ASSA ABLOY Opening Solutions EMEIA Digital and Access Solutions Dukes Court Dukes Street...
Need help?
Do you have a question about the CLIQ Wall Programming Device and is the answer not in the manual?
Questions and answers