Dmz; Advanced Firewall Settings - SMC Networks 7004VBR - annexe 2 Manual

Cable/dsl broadband router

Hide thumbs Also See for 7004VBR - annexe 2:

Table of Contents

7.8.4 | DMZ

If you have a local client PC that cannot run an Internet application properly from behind the NAT firewall,

then you can open the client up to unrestricted two-way Internet access by defining a Virtual DMZ Host.

This section allows you to configure several advanced features for the Barricade™ Firewall.

The following features can be set on this page:

[Advanced Firewall Protection:]

Enable/Disable SPI section of firewall.

[Discard Ping from WAN:]

When this feature is enabled, any host on the WAN cannot ping this product. This helps avoid

unnecessary attacks from the WAN side because your connection is invisible. It is recommended that

you enable this option for security.

[VPN Pass-through:]

Enable this option if you are using a PPTP, L2TP or IPSec VPN connection.

[Email Settings:]

Configure this option if you want the Barricade™ to email when hackers attempt to attack your

network to a specific email address. You will need to configure your email

Table of Contents

Barricade smc7004vbr