Magic Bullet MBF04 User Manual page 16

user interface. user interface.
LOW HIGH
PULSE
home
The dial is in the center
position. The blender is
not running.
Pulse - With the dial in center position, press and hold the PULSE button.
LOW
HIGH
PULSE
low
Turn the dial to the left to start
a preset low-speed blend cycle.
Turn the dial back to HOME
when finished.
High - Turn the dial to the right to start a preset high-speed blend cycle.
Turn the dial back to HOME when finished
30
LOW HIGH
PULSE
pulse
With the dial in the center
position, press and hold the
PULSE button. To stop blending,
release the PULSE button.
HIGH
To stop blending, release the PULSE button
LOW
PULSE
high
Turn the dial to the right to start
a preset high-speed blend
cycle. Turn the dial back to
HOME when finished.
Turn the dial back to HOME when finished
using the
blender pitcher.
warning!
Only operate the Blending
Pitcher with the Pitcher Lid
securely attached.
Never turn the power on while
using the Pitcher without the
Vented Lid Cap inserted and
locked into place!
LOW HIGH
PULSE
1
Place the Motor Base on a
clean, dry, level surface.
Inspect the Pitcher and ensure the Pitcher and Blade are secured. You can tighten and
Place the Motor Base on a clean, dry, level surface
Always use extreme care
and attention when blending
hot ingredients!
Always use caution when
opening the Pitcher Lid after
blending hot ingredients!
48 MAX 6
40 LIQUID 5
MAX
32 4
24 3
16 2
8 1
2
Inspect the Pitcher and
ensure the Pitcher and
loosen the Blade by twisting it in the direction indicated on the bottom of the Pitcher
Blade are secured. To
tighten the Blade, twist it
counter-clockwise onto the
bottom of the Pitcher. To
loosen/release the Blade,
twist it clockwise until it
detaches from the Pitcher .
31